MikeDelta1
Active Member
My brain hurts. I did a test batch for a planned parti gyle in a couple of weeks. I was doing an 11 gallon blonde so I did a batch sparge, no mash out trying to get equal runnings (luckily I nailed it) these are the pre boil numbers since that is what i'll be working with on parti gyle day:
Total: 15 gallons of 1.041 wort
First Runnings: 7.5 gallons of 1.066 wort
Second Runnings: 7.5 Gallons of 1.029 wort
Either my numbers are out of whack or my math is. All numbers are temp corrected.
Using 1.041 or 41 points * 15 gallons = 615 points
First Runnings ended up around 80%
Second Runnings ended up around 35%
And that is where my brain started hurting......they don't add up, doesn't make sense.
The OG of my planned Parti-Gyle is 1.060 Pre Boil 1.049
So if i forget about the numbers not adding up my two beers should come out:
First Runnings IPA: 1.096 Pre Boil 1.078
Second Runnings APA: 1.042 Pre Boil: 1.034
The IPA is a little higher then where I want to be, I'd like to be around 1.070 for the big and 1.050 for the small.
Is there a calculator that if i put in the volumes of each of the preboil containers and enter the original OG and plug in what I want it to be that will give me an amount to swap out? ex: take 1 gallon of strong and trade it with 1 gallon of the weak
This is the grain bill if interested:
20 lb US 2 Row
4 lb Vienna Malt
1 lb CaraPils
1 lb Crystal 10
1 lb Munich
Hop Schedule for IPA: (Should give me around 64 IBU)
1 oz Centennial 60 Min
1 oz Centennial 15 Min
1 oz Centennial 5 Min
1 oz Cascade Dry Hop
Hop Schedule for APA (Should give me around 38 IBU)
.50 oz Falconer's Flight 60 Min
1.00 oz Falconer's Flight 15 Miin
.5 oz Falconer's Flight 5 Min
Other than does this look like it can be done and tasty, the main question is there a blending calculator out there?
Total: 15 gallons of 1.041 wort
First Runnings: 7.5 gallons of 1.066 wort
Second Runnings: 7.5 Gallons of 1.029 wort
Either my numbers are out of whack or my math is. All numbers are temp corrected.
Using 1.041 or 41 points * 15 gallons = 615 points
First Runnings ended up around 80%
Second Runnings ended up around 35%
And that is where my brain started hurting......they don't add up, doesn't make sense.
The OG of my planned Parti-Gyle is 1.060 Pre Boil 1.049
So if i forget about the numbers not adding up my two beers should come out:
First Runnings IPA: 1.096 Pre Boil 1.078
Second Runnings APA: 1.042 Pre Boil: 1.034
The IPA is a little higher then where I want to be, I'd like to be around 1.070 for the big and 1.050 for the small.
Is there a calculator that if i put in the volumes of each of the preboil containers and enter the original OG and plug in what I want it to be that will give me an amount to swap out? ex: take 1 gallon of strong and trade it with 1 gallon of the weak
This is the grain bill if interested:
20 lb US 2 Row
4 lb Vienna Malt
1 lb CaraPils
1 lb Crystal 10
1 lb Munich
Hop Schedule for IPA: (Should give me around 64 IBU)
1 oz Centennial 60 Min
1 oz Centennial 15 Min
1 oz Centennial 5 Min
1 oz Cascade Dry Hop
Hop Schedule for APA (Should give me around 38 IBU)
.50 oz Falconer's Flight 60 Min
1.00 oz Falconer's Flight 15 Miin
.5 oz Falconer's Flight 5 Min
Other than does this look like it can be done and tasty, the main question is there a blending calculator out there?