Maturation of beer flavour requires the presence of yeast as a catalyst. There are many methods of finishing that have the sole objective of prolonging the contact of beer with yeast after primary fermentation is completed. I want to emphasize that a diacetyl rest with most of the yeast lying at the bottom of the tank and not enough in suspension is of no use. Most lager breweries, especially those that use Weinhenstephan 308 or similar “diacetyl producing yeast’s” employ a long diacetyl rest, in order to minimize diacetyl in the finished beer.
Method 1
If a very cold primary fermentation was used it involves allowing the beer temperature to rise from the controlled primary fermentation temperature of about 10°C to 15-18°C when the primary fermentation is coming to an end. Normally, the time is determined by the attenuation of the beer. If, for example the wort starting gravity was 1050 and the expected terminal gravity is 1010, then the diacetyl rest would be commenced when the beer has attenuated to about SG 1023 when two-thirds of the total fermentable material in the wort has been consumed. The diacetyl rest normally lasts for 48-72 hours, until primary fermentation is over and secondary fermentation is under way. At this time the temperature is lowered when the more traditional method is followed, probably 1°C per day until the lagering temperature of 0-1°C is reached.
Method 2
If a warmer primary fermentation temperature was used for ale or lager the diacetyl rest involves either lowering the beer temperature 2 or 3°C at the end of primary fermentation or keeping it constant for up to 6 days. In lager yeast strains with low diacetyl production it is common practise nowadays to employ a short diacetyl rest followed by centrifuging to remove excess yeast and then crash cooling to 0°C. When brewing ales, that should have very low diacetyl levels especially German Ales like Alt and Kölsch, the implications are to not use highly flocculent yeast and to allow an extended primary fermentation, albeit at cooler temperatures until sufficiently low diacetyl levels are reached. Yeast that settles in the cone is still removed on a daily basis.