Partial-Mash Mini-Keg Lauter Tun

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

iamjonsharp

Well-Known Member
Joined
Oct 18, 2006
Messages
576
Reaction score
21
Location
Cincinnati, OH
It's cold outside, so a 3 gallon batch of barleywine on the stove top sounds like a good idea. Whenever I try a partial mash with the mesh bags and colander I have, I just make a huge sticky mesh...so I need a tiny lauter tun instead...

So what to use? Ah, I've got an old Two Hearted Ale Mini Keg lying around...jig saw off the top and take out the spigot..
00829.jpg

Steal a valve, washer, and nipple from my kettle, and o-ring and fitting from my mash tun...
00229.jpg

Put together...
00334.jpg

This where it will go...
00432.jpg
 
Starting to put it together...
00536.jpg

Now with braid...
00630.jpg

Voila!
00135.jpg

Remnants of the mini-mash, about 2.25 lbs of grain...it'll prob hold 3 lbs with sparge water easily...
00729.jpg

Cheers!
 
Back
Top