steadfasthops
Active Member
So I wanted a nice jockey box for doing events, we've got a few weddings and the 4th coming up this summer so I wanted to be prepared.
What I wanted was 6 taps and compact. So I decided to use a 10 gal igloo with a 6 way cold plate chiller inside and to dress it up a bit.
First I cut off the handles and cup holder thing.
Then I took 1"/2" 's from HD and stripped the edges at 10degrees.
Then I cut them so that I could cover the lid with wood and still be able to excess the drain valve,
I glued the wood around the igloo to resemble a barrel.
Next I got these precut wood discs from HD for the lid and bottom. I had to cut the lid side to same diameter as the lid so it would fit.
What I wanted was 6 taps and compact. So I decided to use a 10 gal igloo with a 6 way cold plate chiller inside and to dress it up a bit.
First I cut off the handles and cup holder thing.
Then I took 1"/2" 's from HD and stripped the edges at 10degrees.
Then I cut them so that I could cover the lid with wood and still be able to excess the drain valve,
I glued the wood around the igloo to resemble a barrel.
Next I got these precut wood discs from HD for the lid and bottom. I had to cut the lid side to same diameter as the lid so it would fit.