I use the brass version of these and really like them...converted my gas-side manifold to push-connect
I could also use 10 each. Do they have any for 1/4 bevsel lines
accu. Bev flex line smallest is 3/16 i.d. And a 5/16 o.d. Anything smaller is made for water. I run the 1/4 x 1/4 fitting for my gas lines
1/4 = 4/16 > 3/16
I have 1/4 barrier tubing. Have not ran it ust. Still constructing. But it is a 25ft gustom made insulated truck line. The beer lines are 1/4 ang glycol are 3/8
Wow, 1/4" ID and only 25'? In case you're not aware, the accuflex bev-seal ultra line has significantly less resistance than vinyl or poly lines.
Yea. I ran the numbers. The vertical distance is the reason. Kreezer is in the basement, tap is upstairs. I might have to add some restrictor lines, but the numbers did not work using 3/16
As for the glycol, dont need any fittings. So 1/4 tube od is 3/8s? So i could use 8 beer ones (1/4 flare x3/8)and 18 for gas, what is the best for gas? Thinking i want to use these on my regs and disconnects. Will make cleaning a lines that i backflowed easy. I assume they make flares that i can screw into ball valves after my secondary regs. I have not ordered my gas line yet. What size barrier tubing is best for gas?
I am going with 1/4npt (reg) x 1/4 O.D. tube and 1/4 flare x 1/4 O.D. tube as the gas is pressure more than flow.(I know that there is a a relationship but at the low pressures were using it's not a problem.
Will check Monday but should all be good on sizes AS long as I going this far I am getting 1/4 O.D. Polyethylene tubing for myself if anyone needs I could up that as well $73per 1000'ft roll will do if we get enough to buy inOk. Great info. Btw, where are you ordering these from? I have one last issue i need to resolve. My tap has stainless 3/16 beer lines. I have 1/4 trunks links, do they make tube x tube fittings? I would prob need 5/16 x 3 /8
So if this is a group buy, here is where i am at.
Gas
10x 1/4npt (reg) x 1/4 O.D. tube
10x 1/4 flare x 1/4 O.D. tube
Beer
6x 1/4 flare x 3/8 O.D. tube
6x 5/16 O.D. tube x 3/8 O.D. tube
Glycol
Not sure. Oversees right now and cant remember the size if the tower glycol lines.
My bosses cousin owns a company that supplies the suppliers ( not sure if they make them or not) Was talking with them when they were visiting talked about beer after work they stopped by to see my kezzer and have a few they offered a couple of fitting idea's sent me couple of samples talked to them about getting a few more said may have some others H.B.er's said they could cut me a bulk rate deal so seeing if I could save some others as well as myself cash. Don't think they have a website due to the way they supply giving me a deal because of family or they liked the beer
You should hook him up with bobby m at brewers hardware so we gould but these anytime
I do, but I'm not sure what size to get. I am still building the bar. Don't have any of the gas or keg related stuff yet.
Guess I'm not ready
suorangeguy said:Got mine too. Made installing Bev-seal take about 5 minutes with no leaks. Thanks.
Enter your email address to join: