erikrocks
Well-Known Member
Well, I wrote this email to ClaudiusB, since he seems to be the LOVE expert (he helped me before), but his inbox is full. So, I open this up to the floor...
I tried tweaking the settings on my TSS2 yesterday, and I think I screwed something up. Here's what I want to do:
Have the temp at about 68*.
Cooling would turn on at 70.5* and off at 69*.
Heat would turn on at 66.5* and off at 68*.
So, I set:
SP1=69
r1=1.5
SP2=0
r2=2.5
The only other settings I touched were P5=1, c1=dir, c2=inv, r0=dep.
Yet, my chamber is currently at 63.9* and the heater is still off. What am I doing wrong? Thanks!
I tried tweaking the settings on my TSS2 yesterday, and I think I screwed something up. Here's what I want to do:
Have the temp at about 68*.
Cooling would turn on at 70.5* and off at 69*.
Heat would turn on at 66.5* and off at 68*.
So, I set:
SP1=69
r1=1.5
SP2=0
r2=2.5
The only other settings I touched were P5=1, c1=dir, c2=inv, r0=dep.
Yet, my chamber is currently at 63.9* and the heater is still off. What am I doing wrong? Thanks!