biodarwin
Well-Known Member
- Joined
- Feb 8, 2013
- Messages
- 124
- Reaction score
- 5
Moving from a manual, indoor system to an outdoor system with minimal lifiting. I also wanted to start doing larger batches. This is a 2 tier stand out of wood with a pump. BK to HLT and HLT to MLT will be pumped. MLT to BK and BK to carboy will happen via gravity.
The lids of the coolers will have a bulkhead and Cam-lock A adapter installed. The spigots were replaced with a bulkhead, 3 piece ball valve and Cam-lock F adapter. I wanted to keep the lids closed during transfers to eliminate heat loss as much as possible.
The pump will be a chugger inline pump. For cooling the HLT will be filled with water for a recirculating chilling system. Starting off with hose water, then progressing with ice water. I was thinking about a pond pump if this wont work with the chugger?
Other details:
15g SS Brew Kettle
SP-10 Burner
Any thoughts or suggestions?
The lids of the coolers will have a bulkhead and Cam-lock A adapter installed. The spigots were replaced with a bulkhead, 3 piece ball valve and Cam-lock F adapter. I wanted to keep the lids closed during transfers to eliminate heat loss as much as possible.
The pump will be a chugger inline pump. For cooling the HLT will be filled with water for a recirculating chilling system. Starting off with hose water, then progressing with ice water. I was thinking about a pond pump if this wont work with the chugger?
Other details:
15g SS Brew Kettle
SP-10 Burner
Any thoughts or suggestions?