That looks really sharp brother! Any thoughts on making a custom drip tray that you could mount?
Since there are two pieces of stacked wood with a heavy lacquer I decided not to insulate it, at least for now just for looks, so far it rarely comes on, maybe once an hour or so for a few minutes when set to 45 degrees. I did seal the corner joints with clear silicone.
There is wiring on the thermostat, it's just neatly wrapped and tucked away around back, here it is: http://www.northernbrewer.com/shop/johnson-controls-a419-digital-temp-controller.html
The problem I'm working on now is getting everything sealed, leaked my co2 tank out when I left everything on to test the connections .. oops
Since there are two pieces of stacked wood with a heavy lacquer I decided not to insulate it, at least for now just for looks, so far it rarely comes on, maybe once an hour or so for a few minutes when set to 45 degrees. I did seal the corner joints with clear silicone.
There is wiring on the thermostat, it's just neatly wrapped and tucked away around back, here it is: http://www.northernbrewer.com/shop/johnson-controls-a419-digital-temp-controller.html
The problem I'm working on now is getting everything sealed, leaked my co2 tank out when I left everything on to test the connections .. oops
Enter your email address to join: