DIY Autosiphon Screen

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

aekdbbop

Well-Known Member
Joined
Sep 14, 2006
Messages
2,636
Reaction score
9
Location
Nashville, TN
Well, it worked... wonderfuly.

All I did was take a "reusable" grain bag (i used coarse):
http://www.austinhomebrew.com/product_info.php?cPath=178_33_403&products_id=1060

and ziptied it onto the autosiphon, leaving about 3 inches at the bottom...
5436-misc035.jpg

5436-misc034.jpg

5436-misc036.jpg


so when i siphoned from my brew pot, i left behind a lot of that hop crap at the bottom...
 
Neat idea. I will have to try it until I get around to making something more permanent. Did you come up with any tricks to make sure everything was sanitized? Did you sanitize before you assembled it or after. You can boil the bag but not the auto siphon, correct? Or did you use a chemical sanitizer?
 
yeah you are right, but i did assembled it first, the air dry the whole thing (not sure if it sanitary, but I used the air from a hair dryer). I used Iodephor, and you could tell where it was sanitized because of the stain.. ha.
 
Back
Top