I'm buying a 10 gallon water cooler to make a mash tun. What's a better valve stainless or brass? Brass is about $15 cheaper and was wondering if they both work the same or if ones better.
http://www.amazon.com/dp/B003H83G94/?tag=skimlinks_replacement-20
That's the brass valve. Will that work along with a bazooka screen? Also is there anything else I will need?
http://www.amazon.com/dp/B003H83G94/?tag=skimlinks_replacement-20
That's the brass valve. Will that work along with a bazooka screen? Also is there anything else I will need?
Last edited by a moderator: