BrewManRon
Member
- Joined
- Sep 4, 2011
- Messages
- 11
- Reaction score
- 3
I am having difficulty with a keg... not pouring correctly. I can see there is air intrusion into the draft line.
I have changed all o-rings and seals, connectors, everything... even swapped draft lines to make sure... it is coming from the keg/disconnect somewhere.
I have ensured that the connections are all tight... it is really pissing me off!
The keg itself is a bit shorter than the other kegs I have and am wondering if there is something else (type of keg) that I may be overlooking.
Any additional thoughts/ideas are MOST welcome.
Thanks!
I have changed all o-rings and seals, connectors, everything... even swapped draft lines to make sure... it is coming from the keg/disconnect somewhere.
I have ensured that the connections are all tight... it is really pissing me off!
The keg itself is a bit shorter than the other kegs I have and am wondering if there is something else (type of keg) that I may be overlooking.
Any additional thoughts/ideas are MOST welcome.
Thanks!