SORRY, BUT SOLD: 15-Gallon Polarware Stainless Steel Heavy Duty Brewing Pot with lid, two handles, 1/2" FPT full-port ball valve and a Blichmann BrewMometer thermometer. 60 Quart/15 Gallon/56 Liter capacity, perfect for 10 gallon/37 liter batches.
I've brewed exactly 23 batches of beer in this kettle (according to ProMash), and yet the stainless remains in EXCELLENT condition. This kettle was very well cared for, but it came to me with a very, very tiny dent (about the size of a quarter) where the bottom meets the sidewall below the handle on the right side - it does NOT affect the performance at all, but it is slightly visible. The lid has a 7/8" hole professionally drilled in it with a polysiphone quick disconnect already installed, allowing for the transfer of water or wort into the kettle without lifting the lid. The lid came with a 1-1/2" x 1-1/2" notch cut in the rim to allow for the arms of an immersion chiller to exit the kettle, again, without needing to remove the lid. These modifications were made to ensure my cooling wort was not exposed to wild yeast or bacteria post-boil as I whirlpooled.
The kettle has served me VERY well, but I have just recently moved up to 26-gallon kettles and I no longer need this one.
Additional photos are available at: http://photobucket.com/polarwarekettle
I'm asking $175.00 PLUS POSTAGE
Shipping will be via U.S. Postal Service Priority Mail, with tracking, and I will only charge you the same as the USPS charges me. Packaging and handling is free!
PROST!!!
I also have an EXCELLENT stainless steel false bottom available for this kettle as well - if you are interested, just ask me about it, and I'll include it in the package for an additional $50.
I've brewed exactly 23 batches of beer in this kettle (according to ProMash), and yet the stainless remains in EXCELLENT condition. This kettle was very well cared for, but it came to me with a very, very tiny dent (about the size of a quarter) where the bottom meets the sidewall below the handle on the right side - it does NOT affect the performance at all, but it is slightly visible. The lid has a 7/8" hole professionally drilled in it with a polysiphone quick disconnect already installed, allowing for the transfer of water or wort into the kettle without lifting the lid. The lid came with a 1-1/2" x 1-1/2" notch cut in the rim to allow for the arms of an immersion chiller to exit the kettle, again, without needing to remove the lid. These modifications were made to ensure my cooling wort was not exposed to wild yeast or bacteria post-boil as I whirlpooled.
The kettle has served me VERY well, but I have just recently moved up to 26-gallon kettles and I no longer need this one.
Additional photos are available at: http://photobucket.com/polarwarekettle
I'm asking $175.00 PLUS POSTAGE
Shipping will be via U.S. Postal Service Priority Mail, with tracking, and I will only charge you the same as the USPS charges me. Packaging and handling is free!
PROST!!!
I also have an EXCELLENT stainless steel false bottom available for this kettle as well - if you are interested, just ask me about it, and I'll include it in the package for an additional $50.