matthewroberts
New Member
- Joined
- Nov 9, 2012
- Messages
- 4
- Reaction score
- 0
Hey guys,
First post, and first attempt at brewing all grain for me. I built a cooler mash tun based off some different things I read online, but I am second guessing my design. I think the cooler I purchased may have been a very poor choice, and I didn't really think it through.
Basically the spigot hole is placed about two inches up an incline from the bottom of the cooler. So the filter I made from a dishwasher hose comes out of the T pipe and then has to descend down to the bottom of the cooler. Am I crazy, or will this not be very efficient?
First post, and first attempt at brewing all grain for me. I built a cooler mash tun based off some different things I read online, but I am second guessing my design. I think the cooler I purchased may have been a very poor choice, and I didn't really think it through.
Basically the spigot hole is placed about two inches up an incline from the bottom of the cooler. So the filter I made from a dishwasher hose comes out of the T pipe and then has to descend down to the bottom of the cooler. Am I crazy, or will this not be very efficient?