milesvdustin
Well-Known Member
Are the contacts supposed to be loose in the back? I tightened the spade terminal down in the back but the whole assembly wiggles around. Is that normal?
22mm light question
- Thread starter milesvdustin
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
And? How about a link to the light so that we know what the issue might be.
P-J
P-J
OP
OP
milesvdustin
Well-Known Member
Its the ones from auber instruments. the x1 and x2 contacts on the back, the screw gets tight and holds the terminal snug, but the whole assembly moves around inside of there. All of them do it, but it really seems strange to me.
http://www.auberins.com/index.php?main_page=product_info&cPath=7_33&products_id=248
http://www.auberins.com/index.php?main_page=product_info&cPath=7_33&products_id=248
Ok... That is normal for that assembly. The connections and the switching are firm. The activation assembly does have some 'wiggle' room. That is normal.
Hope this helps & makes sense.
Hope this helps & makes sense.
OP
OP
milesvdustin
Well-Known Member
These aren't switches, just the pilot lights in the link. I have the push button switches for my pump and pid and I k ow what you are talking about by wiggle room. These are just one piece lights. I guess I'll see if the lights work when I power it up tomorrow!
Similar threads
