-
If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WTB corona grain mill
- Thread starter mendozer
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
http://www.austinhomebrew.com/product_info.php?products_id=13349
If you order on Saturday and spend at least $49, shipping is free. Otherwise, its $7 shipping. Good price on a new Corona mill.
If you order on Saturday and spend at least $49, shipping is free. Otherwise, its $7 shipping. Good price on a new Corona mill.
OP
OP
mendozer
Well-Known Member
is there a difference between that and these, quality wise?
http://www.amazon.com/dp/B004Q7JQI0/?tag=skimlinks_replacement-20
http://www.amazon.com/dp/B0038NPJVG/?tag=skimlinks_replacement-20
http://www.amazon.com/dp/B004444XWO/?tag=skimlinks_replacement-20
also, i've read that coronas are for corn not grains. but i guess that doesn't matter b/c we're using spacers right?
http://www.amazon.com/dp/B004Q7JQI0/?tag=skimlinks_replacement-20
http://www.amazon.com/dp/B0038NPJVG/?tag=skimlinks_replacement-20
http://www.amazon.com/dp/B004444XWO/?tag=skimlinks_replacement-20
also, i've read that coronas are for corn not grains. but i guess that doesn't matter b/c we're using spacers right?
Last edited by a moderator:
http://www.ebay.com/itm/190673438604?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_500wt_922
^^ This was recommended via the 'ugly junk mill' thread. AFAIK, most coronas come fromt he same supplier with '500' stamped on it so you are getting the same thing from most places. This costs $30 shipped. You'll also want to add some better hardware which you can read up on in the ugly junk thread. Basically taking out the cheap bits and replacing them with stainless.
^^ This was recommended via the 'ugly junk mill' thread. AFAIK, most coronas come fromt he same supplier with '500' stamped on it so you are getting the same thing from most places. This costs $30 shipped. You'll also want to add some better hardware which you can read up on in the ugly junk thread. Basically taking out the cheap bits and replacing them with stainless.
Similar threads
