bwiens
Well-Known Member
You could always do just a water brew test everything out using the vinyl hose. You will most likely want to do that anyways to leak-test and give a good wash and rinse to everything.
I did mine with cold water through the process and then heated it up and added Oxy Clean. I then rinsed it all and then brought the rinse water to a boil for a hot test. Was fun to see it in action and make sure that any spills and leaks were just water and not sweet wort.
I did mine with cold water through the process and then heated it up and added Oxy Clean. I then rinsed it all and then brought the rinse water to a boil for a hot test. Was fun to see it in action and make sure that any spills and leaks were just water and not sweet wort.