Brewpastor
Beer, not rocket chemistry
I found this on ebay and bought it for the parts, but what do you think it was originally for?
mr x said:Strange device. You can't get any continuous flow through that in it's current set-up. It looks like you charge it, reconfigure the valving and input, and then bleed the chamber.
Ryan_PA said:I am assuming there is an inlet on the bottom of the cylinder.
Yes, there is, it goes into the ss tee. But you still won't get flow through the way it is now, you can only charge it and then reconfigure valving and de-pressurize. Maybe some kind of inpregnation device?Ryan_PA said:I am assuming there is an inlet on the bottom of the cylinder.
Brewpastor said:I am too. It has a one way valve just after the left ball valve, a needle valve on top, another ball valve just past the gauge.
Somebody invested a little change to create whatever it is.
It looks like some form of testing or calibration device to me.Brewpastor said:I found this on ebay and bought it for the parts, but what do you think it was originally for?
GilaMinumBeer said:Why not ask the seller? Might be a good idea to at least know what was being put through it to know how best to go about cleaning it.
EvilTOJ said:It looks like an awesome water pipe to me.
david_42 said:It's a low pressure testing chamber. The top & bottom of the cylinder should disconnect by removing the clamps. Should make a good randell for small parties.
tentacles said:It's clearly a swedish, er, "recreation" assistance device. I see the vacuum gauge, but the pump seems to be missing.
10:1 says "stainless steel"mrfocus said:May I ask what you searched on Ebay to even come up with that? Consider you nor the seller know what it is, it seems to me the search terms would have been quite vague... "shiny gizmo"?
homebrewer_99 said:Ain't dat one of dem der capper-chino ma'chines?
tentacles said:It's clearly a swedish, er, "recreation" assistance device. I see the vacuum gauge, but the pump seems to be missing.
mrfocus said:May I ask what you searched on Ebay to even come up with that? Consider you nor the seller know what it is, it seems to me the search terms would have been quite vague... "shiny gizmo"?
Enter your email address to join: