climateboy
Well-Known Member
- Joined
- Sep 15, 2008
- Messages
- 454
- Reaction score
- 10
Hey, all.
So, I've made about 20 all grain batches so far, and I use Beersmith, but I can never get the finishing volume right.
I want to end up with 10 gallons of wort, using the following combination of equipment:
10 gallon cooler mash tun
10 gallon boiling kettle
5 gallon auxiliary kettle
I'll be making a schwarzbier, so the grain bill won't be too crazy.
My question is, is there a way to set up Beersmith to end up with 10 gallons? I'm thinking that I could get relatively high gravity runnings out of the tun, then dilute in the kettles so that after boil-off and loss to hops and trub, I end up with 10 gallons.
Any assistance appreciated.
Thanks,
CB
So, I've made about 20 all grain batches so far, and I use Beersmith, but I can never get the finishing volume right.
I want to end up with 10 gallons of wort, using the following combination of equipment:
10 gallon cooler mash tun
10 gallon boiling kettle
5 gallon auxiliary kettle
I'll be making a schwarzbier, so the grain bill won't be too crazy.
My question is, is there a way to set up Beersmith to end up with 10 gallons? I'm thinking that I could get relatively high gravity runnings out of the tun, then dilute in the kettles so that after boil-off and loss to hops and trub, I end up with 10 gallons.
Any assistance appreciated.
Thanks,
CB