- Joined
- Nov 26, 2006
- Messages
- 3,996
- Reaction score
- 94
This is a bit of a mystery... Anybody have experience with WhiteLabs European Ale Yeast? It's got an exceptionally low attentuation, around about 70%, IIRC.
Friday night, I brewed a sweet stout, OG 1.059. I used my CFC for the first time, wort was transferred and chilled within about 15-20 minutes. I aerated using medical oxygen and an aeration stone for 90 seconds until the foam was blowing out the top of the carboy. I pitched the yeast (no starter). Then I left to go to work and then visited SWMBO, and then came back home 36 hours later and this is what I found...
A slight amount of residual bubbling covering the surface. This was not krausen, I know what krausen looks like. This was bubbles. It wasn't bubbles upon bubbles, just a single layer, as if it were left from the aeration. Uh oh. No fermentation? There was no indication of any krausen ever having been in the carboy. This is 36 hours after pitching the yeast.
It seems on my last 2 infected batches, this happened, the ferment was stuck for awhile before the nasties got hold of it and then the yeast seemed to ferment the beer right alongside the nasties.. but not until after a holding period of about 2-4 days. So... infection, right?
But...
I'm using better bottles, so I squeezed one and sniffed the airlock. It smelled like beer. So....
I checked the temp, the carboy is sitting at 67F. Could it really have finished that quickly without a starter?
I pulled it up off the floor, that should warm it up a couple degrees. I swirled the carboy to get all the yeast back into suspension, there seemed to be a layer on the bottom, as you would expect if they had indeed reproduced and done their thing. But it wasn't a huge layer... just a quarter inch maybe.
Is there something weird about this yeast I'm using? Or should I pull out a packet of Safale and prepare an emergency starter just in case? Or should I just quit obsessing and take a damned gravity sample already? Like I said, it smells like beer...
For what it's worth, I have bottles of Special Orange Bitter, Orfy's Hob Goblin Clone, and a Maibock... so RDWHAHB is noooo problem for me.
Friday night, I brewed a sweet stout, OG 1.059. I used my CFC for the first time, wort was transferred and chilled within about 15-20 minutes. I aerated using medical oxygen and an aeration stone for 90 seconds until the foam was blowing out the top of the carboy. I pitched the yeast (no starter). Then I left to go to work and then visited SWMBO, and then came back home 36 hours later and this is what I found...
A slight amount of residual bubbling covering the surface. This was not krausen, I know what krausen looks like. This was bubbles. It wasn't bubbles upon bubbles, just a single layer, as if it were left from the aeration. Uh oh. No fermentation? There was no indication of any krausen ever having been in the carboy. This is 36 hours after pitching the yeast.
It seems on my last 2 infected batches, this happened, the ferment was stuck for awhile before the nasties got hold of it and then the yeast seemed to ferment the beer right alongside the nasties.. but not until after a holding period of about 2-4 days. So... infection, right?
But...
I'm using better bottles, so I squeezed one and sniffed the airlock. It smelled like beer. So....
I checked the temp, the carboy is sitting at 67F. Could it really have finished that quickly without a starter?
I pulled it up off the floor, that should warm it up a couple degrees. I swirled the carboy to get all the yeast back into suspension, there seemed to be a layer on the bottom, as you would expect if they had indeed reproduced and done their thing. But it wasn't a huge layer... just a quarter inch maybe.
Is there something weird about this yeast I'm using? Or should I pull out a packet of Safale and prepare an emergency starter just in case? Or should I just quit obsessing and take a damned gravity sample already? Like I said, it smells like beer...
For what it's worth, I have bottles of Special Orange Bitter, Orfy's Hob Goblin Clone, and a Maibock... so RDWHAHB is noooo problem for me.