Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Incomplete Water Profile?

    Call your water Authority and ask them for the information you need.
  2. R

    Another yeast washing question.

    I read alot of information about washing yeast and have a good understanding of the process, but I have not seen anyone write about what I want to try. I finished fermenting a belgium blond, OG 1.060 FG 1.010 I racked off into a secondary leaving behind trub and yeast. I placed it in my...
  3. R

    Question about the fermentation of my Belgian Quad.

    I make big Belgains all the time and mine are never done in two weeks. Mine are more like 3 or 4 weeks in primary then 2 to 3 weeks cool crashing. Relax and give it some time. I use white labs 530 becasue thats what my local supplier has on hand. I've used the Wyeast 3787 to make Belgain...
  4. R

    All Grain with Soft Water?

    First, If I were you I would call your water company and tell them you need more information on the water profile. Thats what I did with my company and they got back to me with my request within a few days. Second most bottle water is also very soft. Deer Parks Ca 3.8 Mg 1.2 Na 2.8 SO4 6...
  5. R

    Thoughts from a local beer competition

    Lodovico, Your from PA right? Why don't you enter your beer in the TRASH 20 Competition. See how your beer compares to some of the locals in Pittsburgh. Last year I think they had 190 entries, They give great feedback on your beers and the medals are nice. I don't know if the competition is...
  6. R

    Quick water question....

    I make adjustments for the total amount of water used, then split that up into what ever amounts needed during the brewing process. I don't know if thats the right way or not, but thats how I roll.
  7. R

    Beer vacation to Belgium

    I lived in Europe 25 years ago and went backpacking in 2006. Belgium you must go Westvletern !!!!! . Brugge is a must. Charle Rockets is a cheap place to stay and close to the center of town.The De Halve Mann Brewery tour is good, also go to t' Burgs Beertje over 300 Belgium beers. If you go...
  8. R

    Belgian Water Profile?

    This is a Chimay water table I got out of a book called Brew Like A Monk. Great Book! Chimay water is known to be softer for Belgium Beers Ca 70 Mg 7 Na 7 SO4 21 CL 21 HCO3 216 If your making a 5.5 Gallon batch you will need roughly 8.5 gallons of water to start. take 4.5 gallons of your...
  9. R

    Belgian Water Profile?

    Lodovico, What type of Belgium beer are you trying to create? Softer waters are used for pale ales , darker beers dubbles and dark strong ales are more suited to higher bicarbonates. Are you a Extract or all grain brewer ? knowing this will help members give better solutions.
  10. R

    Belgian Water Profile?

    Your water profile is not too far off from Rochefort's water. I see your missing your Magnesium content in your post. Rochefort Profile CA 82 Yours 81 -1 MG 10 ? ? NA 6 20...
  11. R

    Hop storage

    If you don't brew often,seal them up tight and put them in the freezer. For your second question using the same hop for bittering and finishing is ok, but it all depends on the type of hop and what you are brewing.
  12. R

    slow belgian abbey II?

    I make Belgians alot and have mine in the primary for about 3 weeks before they are done. I usually start at 68 degrees and let it go up in the high 70's. Just get it some time.
  13. R

    Questions on new equipment for Brewhouse Efficiency

    Well I set my efficiency percentage at 75 and adjusted the grains for my recipe. My preboil reading after sparging was 1.052. I added my Candi Syrups and decrease the DME by a pound. My OG at the end of brewing was 1.092. If my math is right my new efficiency is 82% Thanks again eveyone for...
  14. R

    Questions on new equipment for Brewhouse Efficiency

    Thanks everyone for your suggestions, I wish I had some more time to do a test batch, but the Snow fall we got in Pittsburgh has been crushing. Work keeps calling and the overtime is too good to pass up. I think the suggestion to shoot for a ballpark range and adjust with some DME is the way...
  15. R

    Questions on new equipment for Brewhouse Efficiency

    I use a 10 gal rubbermaid with an SS braid, but replaced it with a SS false Bottom. I also purchased a Barley Crusher grain mill to crush my own grains. I plan on leaving the grain mill at the factory setting for now. I usually batch sparge and have a brewhouse Efficiency around 65 to 68 %...
  16. R

    Half batch/full yeast pack?

    I don't see any problems. go for it
  17. R

    AG Chimay Red clone help

    First Question The green apple flavor may be acetaldehyde, its a intermediate compound in the formation of alcohol. Some yeast strains produce more than others. The presents usually means the beer is too young and needs time to condition. Second Queston 66 degrees should be fine, some people...
  18. R

    Bottles Cap Identification

    I use both Standard and European bottles. The caps are the same, but some 750 ml European bottles seem to have a larger cap. You will just have to try them out and see if they fit.
  19. R

    Help Tweaking Westvleteren Blond Recipe

    I love this beer and happen to have a few stored away in my cellar I wanted to see if I could get a clone as close as possible. I tasted mine next to the real thing and find them very close. Mine just needed a little stronger Hop flavor. I put my Flavor hops in the last 10 minutes of boil, I...
  20. R

    Fermenter Too Cold(?)...impending doom(?)

    Yes, I agree with Pangea watch out for bottle bombs. Chalk this up for a first time brew. We all started out the same way. I bottle all the time. I would check on your bottles and crack one open every few days to see what kind of carbonation was buidling up. I would not empty the bottle back...
Back
Top