Search results

Day Tripper, how easy was it to add the tap # row column to the bottom of you tap list? Does it add or subtract when if you +/- taps?

Hi all! I've been super happy with this Rpints setup. I have messed with it a lot, Still not a pro. This is an easy question. when I put a beer on tap the info from the beer should auto populate the fields that are filled out from the beer info, SRM, ABV, ETc.. well some where along my journey...

So you think that a vertical Mount might help?

My meters are horizontal about 2’ of tubing away from th kegs on the top left inside the keezer.

Ghost Pours: I'm still having issues with ghost pours, I did install a 4" small fan I run off the Uno to help with distributing cool air in the keezer. I'm using swiss flow meters I make cider, mead, and carbonated waters. Typically I like to carbonate with 30 psi and let the keg sit for about...

I've stumbled across a few RPints GUI mod's in the past as i was researching other issues. Does anyone have any cool mod's that they'd like to share and how to's Thx :tank:

Not exactly a flow meter question, but maybe. My meters are reading pours when I’m gone. There seem to be no leaks and I just replaced most of my tubing to the taps. And o rings on the outputs on the kegs. And no one is pouring 220 oz. it seems to MT my kegs eventually only 2-3 taps have had...

http://raspberrypints.com/download/

All my taps seem to be reading high flow rates (20oz+ pours) when I pour like 4 oz in the glass. maybe things just need to settle down in my keezer before I go judging it.

Thank you CADIBREWER. Yes that's the amount that Pulse_count is set at. Possibly I have an over carbonated/pressure set to high on my CO2, I can try adjusting accordingly. I make cider and like it over carbonated, if this is something I can adjust in the Pulse_count on the Pours.php if I notice...

Hi can anyone out there help me our with the pours calculations. Im using the swissflow meters and it seems like my pour volume is high. like 4 oz reports 22 oz. Is there a change in the pour cod i need to look at?

Hi everybody, Thank you Day_tripper and Cadibrewer for helping me out with my questions! I got the UNO and the flow meters up and running on PI 3. I've only been able to blow air through them so far. I just hooked up all 5 flow meter to 8-12 and im using 1- GRND to 5 wires and 1- 5V to 5 wires...

Thats kinda reassuring... i wont stop until i get it to work. I just ordered a UNO but untl them i will still tinker. I did just reinstall the jessie-setup and re compile and upload and got a different out put: avrdude: stk500_getsync(): not in sync: resp=0x00 any ideas?

I did run the dos2unix, well thanks for your help. I’ll try a uno.

m after i stop the service and start the listener and blow into the meter i get nothing in the terminal window.

pi@raspberrypi:~ $ sudo /etc/init.d/flowmon status ● flowmon.service - LSB: Put a short description of the service here Loaded: loaded (/etc/init.d/flowmon) Active: active (running) since Sun 2018-02-25 04:20:12 UTC; 40min ago Process: 2233 ExecStart=/etc/init.d/flowmon start...

here is the results from the test. doesnt match the expected results. pi@raspberrypi:~ $ ps aux | grep flow_monitor.py pi 2238 0.2 0.7 13856 6952 ? S 04:20 0:00 /usr/bin/python /var/www/html/python/flow_monitor.py pi 2278 0.0 0.1 4272 1828 pts/0 S+ 04:20...

This is a Ri 3 model B. Yes, I can see the alamode and the serial /dev/ttyS0 The last issue I had with the upload was the "cant open /dev/mem" displayed on the bottom output area. Im now able to get some info back from: $ sudo /etc/init.d/flowmon start $ ps aux | grep flow_monitor.py But its...

ok, permissions on that folder did get rid of most of the errors. The last thing that shows up after the up load is "cant open /dev/mem" not sure if that an issue or not. flow meters still not working yet

Tried that, just now, and still I have the same issue. The Raspberry pints access and functionality is perfect everything is working just as it should. I looked like the permissions were "/usr/share/arduino/hardware/tools/avrdude": error=13, Permission denied" but I don't know if I should mess...