Search results

Just finished installing RandR's Pints but script wont go through if I select "Load Sample data" and when I dont and script does finish BUT 127.0.0.1/index.php wont show anything at all and administrator page wont let me log in, any idea where im wrong? thanks

there is a well explained guide at page #14 on how to flash the bins for the ESP8266, dont know about OTA updates

im down, inbox ;)

i would actually say the Pro for the antenna plug, added one to all my wemos and never had signal issues again, cant really complain about them since its they are only $6 for the wemos

has anyone had issues setting static IP on BPL?

so on step 6, once you connected to the ESP8266 Wifi interface and put in the info for your wifi the ESP8266 will reboot and connect to it, then you can access BPL on a web browser either on "brewpiless.local/" or by its actual IP address, you can find out which ip it is by using "ping...

220k works perfect, mine has had no issues

Nice! i actually lost one of my boards because of the same issue

Definitely cold crash for 2-3 days, no clarifying agent's though, you want it to be hazy but not muddy

So i got the base and the receiver for wireless charging and it looks like it can be charged and still report at the same time, no need to remove the lid, the iSpindel just gets a little warm but nothing to worry about i think.

yup yup, running it myself right now, 2.3.2 thorrax bin :rockin:

if you are using Thorraks pcb you have to use the "thorrax" bin, brewpiless has a few bin variants for different uses https://github.com/vitotai/BrewPiLess/tree/master/bins

Thanks for all of the help. What I would like to do is use pin D3 for the wake-up button and eliminate the buzzer. Pin D3 on the PCB goes to a jumper with one side to ground and the other side to pin D3 of the wemos D1 mini where you able to use the D3 as a wakeup button on that board?

nice build, would probably recommend switching to a power supply that is not that exposed to water.

hope you got a Schottky diode BAT43 instead of the 470 Ohm resistor ;)

You might be able to use this one but the max OD is 33mm ID 21mm, if you take a little off the lip below the cap might fit in a carboy.

No problem at all, i have my threaded stone and x2 5 microns in the same jar, will work with your stone as well

you cant really see the bubbles after a while but its still carbing the beer, blichmans does the same exact thing, I also boil the stone for 10 min after im done using it and leave it in a jar with star san to avoid clogging

If you are using the 2 micron stone, what i do is just set the PSI +6 than what the carbonation chart says and run it for 45 min. It should equalize after a while and you will stop seeing bubbles on the return line but that is normal, just set it and leave it and once it finished disconnect...

I am actually waiting for my diodes too