Search results

Tilt reading today is 1.000, which seems even stranger... If it's done, that was the fastest ferment I've ever had! Fingers crossed...

Today the Tilt shows 1.000! How the heck am I going to guess an ABV? I'll definitely brew it again! Last year I did one and it was by far the most popular beer I've ever brewed (by myself and my friends), which is why I'm kicking myself for screwing up this batch. Who knows, it may turn out...

Thanks for the responses, everyone. I'm reassured and content to wait this one out for a few weeks to see how it turns out.

I brewed a Wit Saturday. It was my first batch in a while, and I admittedly didn't take the time I should have to refresh myself on some things. Long story short, I really screwed up my mash temp. Instead of mashing at the expected 154F (should have been 148F), I way overshot to 167F. I wasn't...

Now for the Million dollar question, has anyone tried that branch of CBPi4 and would you recommend trying it? :oops:

Thanks Phoenix, it does help. Yes, I meant Beer Smith 3. I'm set up just like you suggested, using mash method B, and I've been trying to take advantage of how CBPi3 will take the XML from Beer Smith 3 and and automatically set the target temp based on the steps from the XML. During the Mash...

Concerning my brewing process using CraftBeerPi 3.0... I'm getting a bit confused with how to control my system configuration versus some of the other systems described out there. Most seem to be 3 vessel systems with 3 elements, multiple pumps etc. I understand that's probably the ideal, but...

Thanks rkhanso! I changed to PWM logic and that is working. When I'm heating the element, the Element button flashes now, and I'm assuming that's normal.

I have a few post-1st-brew questions/problems for those of you familiar with CBPi3.0. Hopefully someone can tell me what I did wrong... I imported an XML file from BS3 which had several basic steps for mash in, mash, boil, cool, etc. Using the Step Config I added some steps to be sure I'd...

I started over completely, beginning with the OS and then loaded the BrewChef version of CBPi3.0 with zero problems.

Got it! Now I just need to do a run with the element connected and some water in the kettle. Thanks for the help!

Thanks for checking in, Phoenix. Unfortunately, I've been traveling for work all week and haven't been able to do anything! I'm hoping I can get some work in on it Saturday morning. My plan is to wipe the Pi and reload everything from scratch...

swimlan, I believe so. I've tried many different actor types and combinations. I've had it on GPIOPWM at Hz on IO18 most recently. I still get the error when I update.

I did rename the folder, and now that makes sense to go to that directory to do the test... I was just trying the other GPIO types to see if one of those worked. You are right about the ULN. I'm using it to switch 5V to the SSR. The SSR says it will trigger at 3V, but I figured I'd try...

I've completed the steps you laid out and it seems to put me back where I was. However, this does seem like a more complete load. I noticed it automatically installs several plugins (or perhaps it pulled from the ones I previously installed). I didn't have to install anything else to get it up...

Phoenix, thanks for jumping in here! I finally was able to try this today. Here's where I'm at: pi@raspberrypi:~ $ sudo git clone BrewChef/craftbeerpi3 fatal: repository 'BrewChef/craftbeerpi3' does not exist Edit: I see the problem. It should have had the actual web address: sudo git clone...

Ok, so I've been able to double check my wiring to the SSR from the GPIO18. It all looked good, so I checked to see if the GPIO is firing. It's not. I tried others as well, and none are firing. Thoughts?

I do have it on an ssr, powered via a ULN2003 from GPIO18. I'm getting Actor Error: Failed to setup actor 5500W BK Element. Please check the configuration

I'm glad you kept pushing this Phoenix. That pushed me to remove the wires run to the terminal and It turns out that I had a small short between data and VCC where I connected to the hat! Once I found that I did a quick test, connecting a sensor directly and it showed up fine. Thanks!! Next I...

Posting a few pictures of my system wiring. Perhaps it'll help. I’ve tried 2 different sensors. One from Arber and a generic ds18b20.