Search results

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Single Tier HERMS system

    Single tier HERMS system. Comes with everything pictured. plus more. $1800.00 Oak Harbor Washington
  2. A

    Brutus Ten ????

    I wired main power through the red guarded switch so I could secure it quickly if needed.
  3. A

    Brutus Ten ????

    These should work as I've done something similar. The rotary switches tend to be wafer switches and I gave up trying to use them. The other two or three position switches should work fine as long as you keep the amperage low as most of these are desined for low amp dc circuits.
  4. A

    Troubleshooting RIMS controller with MyPin TA4 PID and Fotek SSR

    So the RNR means that the PID is the actual relay. I'm using it to control a propane valve for my HLT HERMS with 25VAC so I'm pretty sure I can still use the PID if I supply the 5VDC to trigger the SSR through the PID.
  5. A

    Troubleshooting RIMS controller with MyPin TA4 PID and Fotek SSR

    Found my answer here. https://www.homebrewtalk.com/showthread.php?t=495647
  6. A

    Troubleshooting RIMS controller with MyPin TA4 PID and Fotek SSR

    Borderbrewer, Thanks for the quick reply. I have the spec sheet as well, and have tried both the PID and analog modes with trL set to 10 and trH set to 100. I'm worried I might have a setting incorrect and don't want to order another PID if that is the case.
  7. A

    Troubleshooting RIMS controller with MyPin TA4 PID and Fotek SSR

    Hi, I'm having similar problems with my TA4. I have a TA4 RNR and a SSR-40DA. I've tested the SSR with a 5vdc power supply and it works. The TA4 does not put out any voltage at the SSR leads 3 and 4. But when the output light is on the SSR output closes and reads 0 ohms between terminals 3...
  8. A

    My Brewstand (thanks Pol!)

    That looks great!! can you provide a drawing of how you wired the gfci in? I'm writing my schematic and don't see how it works? Thanx
  9. A

    So...You Want to Breed Your Own Hops.

    Hi, I admit I haven't read the whole string on here. I am trying to find out what varietal I should grow. I live in the Pacific Northwest on whidbey island. The spot I have to grow would be facing south with mostly sun. Just trying to find the best that will grow up here so I'm not struggling...
  10. A

    Single Tier, 3 Pump, BCS-462, Automated Rig

    I'm sure this is answered somewhere else. But I am building my own single tier and had originally thought to mount the two chugger pumps i'm using on the inside of the outer support legs. Unfortunately that doesn't leave me the space I wanted to store my Mash tun etc underneath. I'm...
  11. A

    Soldering Stainless steel

    Does the 7/8" give enough mechanical "grip" so you have to complete the dimple with the coupler you plan on soldering?
  12. A

    Soldering Stainless steel

    Nostalgia, I'm curious the size hole you drilled in the keg before making the flare/dimple. My concern in making it to small/large and cracking the keg or not getting enough dimple for the solder. Thanks, Adam
  13. A

    Brutus Ten ????

    Has anybody tried using aluminum to make the frame? How well did it work?
Back
Top