Search results

Figured it was going to be my only chance to see totality, the original plan was to head a few hours from me to the Lake Placid area. Then that national weather service cloud map came out on Sunday and decided that little sliver of northeast Vermont was best option. Turns out everyone else...

Still available? Would you be willing to do $70? Could pick them up or meet you somewhere tomorrow or Friday.

Last year around mid August Hops Direct had a really good clearing out the freezer sale for leaf hops, $2.50/lb. A few months before, I started making hop seltzer and was really enjoying it. The rate I was going through hops and seltzer was fairly high so I decided to get 10lbs and...

This reminded me to make a backup. Unfortunately just getting 502 Bad Gateway when I try. On latest update. Tried logging in/out, different browser and ./install.sh. No luck.

Added a couple bugs I found to github. Also found wrong address listed in documentation. Not knowing how pull requests work just gonna post it here. https://docs.kegcop.com/en/main/troubleshooting/index.html Backup and Restore http://{hostname}.local/edit should be...

Figured out the issue. I have a somewhat different setup with 2 kegerators that have 2 taps each. Instead of running an ethernet cable from the 2nd tap to the 3rd tap in the other kegerator, I just used the next plug on the mainboard to limit the wires going into the 2nd kegerator. Didn't...

Got 3 of 4 taps working but having problems with the 4th. Believe I've narrowed it down to one of the Swissflo sensors. Have paired it with known working breakout boards and ethernet cables but can't get a reading during calibration. The port on the mainboard works as I've isolated one of the...

Had the same problem with the red seals. All of them cracked in less than a year. I have 2 other early Nukataps that had the white Intertap seals so they are interchangeable. The white ones are still fine on those taps so I ordered an Intertap kit just so I could replace the red ones with...

Just noticed something about the Cannot receive LCD text from Controller/Script issue. I have 2 devices, both are mini fridges that I converted to kegerator/fermentation fridges. Had 2 fermentations going so both were logging and temperature was in beer mode. This caused the error every...

Finally getting around to putting everything together. To everyone who used the John Guest PM450813E 3/8" BSPP to 8mm for the connection to the swissflo sensors. Do you need to wrap the threads in Teflon tape? Or will the small rubber washer at bottom of connector be sufficient? Also, is...

I'm in the middle of a fermentation so don't want to update until finished. Will report back when completed.

Yes. Restarting fixes without reconfiguring.

I'm having similar problems with "Cannot receive LCD text from Controller/Script" with my 2 current fermentations, except mine cutout after a few hours. Running on a linux mint VM. Everything connects fine for a couple hours after a reboot. fermentrack-processmgr.log...

Another WLP001 vs Dry. https://www.williamsbrewing.com/yeast

It appears to be the default setting in the control constant setting. Does that only apply during a fermentation logging session or when the control is set to beer constant? I've always interpreted it as the low and never messed with changing the values.

Prefer to assign when you begin logging. I've accidentally thrown the wrong numbered ispindel into the wrong fermentor more than a few times.

Amazon basically gives them away for free every year during Prime Day and Black Friday if you order through alexa or alexa app. They really do come in handy for all sorts of scenarios.

For anyone who may run into this very niche scenario in the future. I connected the power strip to a Kasa Wifi outlet. I just toggle the outlet power with the Kasa app and everything is back to normal. I'm sure any Wifi outlet would be fine too. After staring at an unused Kasa for 6+...

An update for anyone interested. The Molex 0533240360 I received from Arrow is the proper connector for attaching the Swissflo to the "dasilychain-molex" breakout board. https://www.arrow.com/en/products/0533240360/molex It is considered discontinued EOL and not available on Mouser or...

That's a documented characteristic of this yeast. Think Lallemand used to call it ESB so you might find more information searching that name. I experienced the exact same situation when making a Brown Ale. Stopped at around 1.019, then 2 weeks later it started up again and finished at 1.009.