Search results

I used Wyeast 1318 London Ale III on my last small batch and the temp got up to 74/75 at one point. Probably about 2 days into fermentation on a 2g small batch. I know this is higher temp for this yeast. My question is, If a yeast strain ferments at a higher then "normal" range for the yeast...

Anyone see any issues with this IPA recipe? Going for a NEIPA type.

Looking for a Tree House Julius clone. Possibly a extract if possible. If not, all grain would work too. Anyone have or know of one already in beer smith so I can just download, scale it and go? Thanks,

I have a co2 tank with 05A15 on it. Does that mean I will need to have it re certified next year May 2020? Or is it expired and won’t fill?

I accidentally turned my heating element on for about 15sec. Without water/liquid in the kettle. Is it ruined? Has a slight “burnt” Oder mildly but still functions (with water of course). Can I use it with no off flavors? Can I use something like vinegar to clean it to see if the burning smell...

I did a 5g batch, carbed it at 40 degrees for 7 days. Came out decent then I took the keg out of the fridge to clean the fridge and what not and thought I put it back in and didn’t. It’s sat in my garage for 5 days at room temp. Can I still use it and re chill it back in the fridge or will it be...

Is there any ways to alter flavors after fermentation has completed? I made a yellow rose clone and fermented at 67 with us-05 and it turned out sort of a sweetness/sort of buttery taste. I did two packets of yeast. It’s not horrible but not something I want to drink 5g worth. Anyway to add...

Trying to brew a 5g batch and am looking for good successful recipe for a smash, Citra, hazy IPA recipe. Something with great notes and fruitiness.

I’ve made a bunch of brews and all have come out with a sweetness to them. Not a bad flavor like corn or anything like that but just a sweet type finish. This weekend I’ll be brewing a smash ipa which I’ll list the recipe below. My question is, I know I can add more buttering hops to possibly...

I'm going to be brewing an IPA (recipe in pic) and am wondering what and how much do I need to add to RO water to get a good water profile for an IPA?

Going to be brewing a surley furious IPA which I ordered white labs wlp-0700. I have had issues with pitching and am trying to make sure I get a good fermentation. Can I use the white labs and also safale S04 together?? Or will that alter the beer?

Brewed an IPA and been in primary for 3wks. Trying to find out how much dextrose would be needed to get the correct carbonation for an IPA? Also is it better to use dme which I also have?

I had an opened bottle of starsan that was in a plastic bag,caps on and was left out in my garage here in Houston for the summer. Is it still good or toss it due to being left in the heat??

Currently I have a copper immersion chiller and seems to be ok but am looking at the silver serpent stainless one since the bends over the top of the kettle and the fittings rather than just tuning onto the current copper chiller with clamps which the tubing starts to kink due to heat. Is it...

I went to brew this weekend and try out my BIAB system. All was going well until it came time to chill the wort and BAM, wort chiller was not where I left it and couldn’t find it. Also had no way to fit the kettle into the sink (too big) with ice. So, the only thing I could come up with was to...

I am trying to make a element enclosure to put into my kettle rather than use my hot rod heat stick. Does anyone have a parts list that I can get everything (except for the lock but and high temp washer) which I already have. I just need what electrical enclosure to buy and parts and such...

I have currently a 2000 watt electric BIAB system I made using a pid with relay and my chigger pump to recirculate the mash. It's currently wired with 20amp cord which is I believe 12/3 I got by the foot from Home Depot. I am trying to figure out since I moved what would I need to do to go up to...

I moved and my new house has a 20amp breaker in the garage. The outlet is only a 15amp gfci and I am trying to change it to 20amp gfci for my element. I was told to make sure that the wire in the wall is 12awg and not 14awg. (Which 12 is needed for a 20amp outlet). Can someone please assist in...

I currently own a cheap little pump from Amazon like this:https://www.amazon.com/gp/product/B00PXXJEHE/?tag=skimlinks_replacement-20 I used it one time and it died somehow. I tried to take the impeller out to clean and even tried a new dc adapter and NOTHING! I am suppose to brew today and...

Can someone help me out with some electrical/PID controller/Electric element clarification. Currently this is my electric system I am using: Manual/ Auto-tuning PID adjustment Temperature Controller SNR and SSR-40DA Solid State Relay, in an electrical project box. It has a 20amp 3prong plug...