Search results

In reply to others: I intend to switch from the coil to sparge water to get all the wort out of the coil. Also installing a 3 way valve on the herms pump for priming. I have asked others and there should be no issues with 1/2" to 3/8" and back to 1/2" into the mash tun. Buying a new 15 gal...

I will attempt to explain what I want to do then the question. I have a 10 gallon cooler/false bottom for all grain. Mashing typically, 1.35 qts/lb. Value on mash tun to steel head pump inlet. Outlet of pump will have a throttle valve and a prime valve to relieve any air when starting the pump...

I am a new brewer since last November 2012. I bought a premium membership for both brewers friend and beersmith. Hands down BF IMO is better. Why? BS is much more difficult to drive and figure out even with the helps and videos. Videos are not done well. BS seems to be more detailed in some...

First, using a chest freezer with Johnson controller for ferment temp. Secondly, spared nothing for good equipment. Thirdly, all grains steeped on stove in three quarts of water, then pored into wort as part of the 6.5 gallon. Using 2.5 qts/lb of grain as not to leach tannins. Lastly, 5 gallon...