Search results

Thanks for the info. I may pick one up

For those who own or use a robobrew, how well would it function for small batches? I’m looking at maybe 2.5 gal finished size. I also would not like to use an additional vessel for heating sparge water. I would be using it as a true ebiab. Any help is appreciated

bob, I would be running a regulator on the tank. to the best of my knowledge the hoses at lowes/home depot that I have seen are all for natural gas or low pressure and would not work for 10-30psi or high pressure. If I am wrong on this let me know

Due to convienence of the build, I ended up with them a little closer than the stock setup. But I assumed with the low pressure I wouldnt need as much space w/a lower flame height. I am beginning to think this is too little of space to work correctly.

Thanks for the help everyone. I run blichmann burners which are designed to be run on high pressure. I have changed them over to low pressure, and yes I havent played w/it enough but Im not thrilled with the low pressure. I will still do some more playing but I would like to have info on the...

I would like to change my set up a bit. Currently I have a two burner brutus type rig. I will be changing my solenoid setup and the current hoses will not handle anything above low pressure(I think they were .5psi). So I am looking to get some other flexible hoses that will work for high...

Onehoppyguy, I dont understand what those valves you linked to actually do. Can you explain the operation?

Bob, I dont follow, I didnt mention regulator location at all. Can you recommend a website for these hoses?

Is there a company/website out there that makes flexible hoses for high pressure propane? Or do I have to have one made a propane supply store? Just looking to see where to get started w/this.

Hey guys I am trying to research some options of pilotless ignition systems,so I thought I would start here. Right now I have honeywell valves running on low pressure lp. Are the electronic ignitors that come on when the honeywell is told to open? Just wanting to know what is out there. Thanks

I am running low pressure which is set 11"wc and the air shutter is opened up all the way. Microbus I think you maybe on to something because my flame always looks worse with kettle on. Ive got some things to try, thanks.

Well it seems to be a good looking flame for a while, then I noticed more yellow and of course the black soot. I just couldnt figure out what had changed. Everything was clean.

Ok guys just been testing my new brutus type build and I was boiling up some water and everything looked great until I noticed some black soot building up on the edge of the pot. This occured about 45 min or so after I fired it up. I have had this problem before but I thought it was caused by...

ok good to know,so how does it get reset after it has tripped? do you close the valve and reopen with some pressure against it?

Thanks is the excess flow valve in the honeywell or built in to another piece?

Kladue, I dont know what you are referring to in the black and green tank adapter. By saying tank I can only assume you referencing the propane tank, thus meaning an colored adapter going to it? Need a touch more info on this. thanks again--also I did get one burner to fire correctly the...

I just made the adjustment on the honeywell, screwed the regulator as far down as it would go and still not getting much fire at all. Any other suggestions, should I mess with the orifices some more? Kladue, I did change out the springs before, thanks

Im running propane I forgot about the fact that come set low. Time to start adjusting, thanks much

Ok guys I have got this brutus type rig pretty much put together but I am very dissapointed in the flame. I am running two burner set up w/ the following parts--200,000 btu low pressure 2 stage propane regulator set 11" wc,honeywell 8200's, ball valve, flex line, and finally blichmann burners...

mmurray--I believe that you have to be about .5psi to be low pressure, or so I think I have recently learned.