Search results

Ha! We might have a corruption problem here, but I don't think they'd sell out for that little. ;)

Edit: Updated with price. Sorry about that. Haven't brewed in easily 4 years and getting ready to move so I figured this is a good a time as ever to attempt to party with the equipment. If you see something your interested in please make an offer. Prefer local pickup, but fine shipping...

Apologize for taking so long to get back to you. Been traveling for work. I'm in just a bit south and west of the Wickerpark/Bucktown area near Chicago and Ashland. I'll PM my exact address if you want to make a purchase. Here's the IC.

Bump Willing to ship the plate chiller if your're interested the rest I'm assuming is size/cost prohibitive. I currently have - two 5 Gallon Glass Carboys -$20 a piece or $30 for both SOLD - four 3 gallon better Bottles -$15 a piece or $50 for all four - one stainless 25ft immersion...

I don't have a greatbreweh but I have a similar pump. Mine is directly connected to the kettle.(check my sig). Priming seems to be an issue with these pumps. I would try first lowering the pump so it's a little lower than the outlet of the kettle in the begining. In the video it's sitting on...

I would suspect the 3000 watts would be enough to boil 7 gallons. I know I've read some people have luck with 2000 watts being able to boil 7 gallons. I'm guessing there are some other factors involved like kettle dimensions. Personally I've tried using one 2000 watt element and it was not...

I wouldn't trust it to hold the weight. I could probably bend it in half just using my hands. It works great if you are setting it on a counter top though.

I was walking through Ikea and noticed this. It fits perfectly under my 44qt Bayou Kettle. Stainless and only 7 bucks. http://www.ikea.com/us/en/catalog/products/30111087/

Not sure its the case here, but I always had trouble boiling with just a 2000w element using a large diameter pot, when i switched to a smaller diameter I could achieve a weak boil. Ultimately I went with 2 x 2000w elements

I would tend to disagree on the only needing a 2000w element. I think there are a few variables that might come into play. What volume are you boiling and your pot diameter being the two biggest factors. In my experience I was unable to get 7 gallons to come to a boil using a one 2000w...

I think it depends on how much you want to invest. You could pretty easily go tphjr route with minimal investment, or you could build a full on electric kettle. Which you could then add in the HERMS coil. While neither of these are HERMS systems. I would think they would get you the...

Is it a gas or electric stove you're using? there are a few examples of people using an electric stove in combination with an electric brew kettle. Some have even unplugged their stove to use 240v. If it's gas I would be very careful. The heat that would come up the sides of the pot put some...

I got the generic versions off Ebay. Although it looks like the seller currently isn't selling any, you could try messaging them directly. I got 7 sets of for right around 30 bucks. http://www.ebay.com/itm/370641946200 http://www.ebay.com/itm/290764950045

Russki, I was getting ready to add a sight glass to my rig, but can't decide if the eye bolt that holds the top of it will get in the way of the basket. It looks as if you were able to get the basket in past the bolt on some of your pictures. Does it get in the way at all? There really...

I use generic versions of them in my setup. They're very nice. I like the way they twist lock so much better than the regular speakon connectors. Alien got it perfectly the blue goes to the blue and grey to the grey. This page shows a good diagram of the difference, it's basically impossible...

I bought my Powercon's off Ebay. It looks like the seller took the auction down but if you message them perhaps they could help you out. They are generic versions, but they're also a steal if you order a bunch. I got 7 sets for right around 30 bucks http://www.ebay.com/itm/370641946200...

So I got a new toy in the mail today. I've been wanting to get a removable whirlpool arm similar to this. My dilemma was I don't own a torch or anything else that could sweat the copper fittings together. So before buying a torch I was curious how much it would cost to fabricate one out of...

Nice. Good Luck. Be sure to check out Russki's build as well. We both built ours right about the same time. They're basically the same with some slight differences. I also linked some other helpful builds a few posts ago.

Yes. I originally wasn't sure if I was going to place it in a T on by the ball valve so I went with the 1/2 NPT RTD. I ended up mounting it directly. You almost got it right, I also have a silicone wash in between the SS washer and the kettle wall. Leaked at first as I over tightened it...

I actually use a similar pump and power supply that you have listed. I just use a regular outlet on my panel. I tried finding the locking outlets on ebrew supply but couldn't find them, can you post a picture? I'm assuming you would have to somehow create an adapter that would allow the...