TheHunk
Well-Known Member
- Joined
- May 2, 2009
- Messages
- 125
- Reaction score
- 5
I have had issues with leaks in my system but I think I have most all of them solved. The issue I am having is that when I turn the screw to increase the keg (low side) pressure to 10 PSI the needle on the low pressure gauge goes nuts vibrating and bouncing. I can also hear the regulator hissing. When this occurs I have soaped the entire gauge and zero bubbles appear. I have taken the regulator apart and found no internal issues (beer, liquid, etc...) The only part of the regulator that I didnt dis-assemble was the screw-in poppet in the middle of the regulator. When I turn the pressure back down to about 8 PSI the vibrating stops. I purchased the regulator about 2 years ago and it started doing this about 2 months ago. TIA