twd000
Well-Known Member
I have seen some of the "carboy washers" that pump water into an upside down carboy. And I saw this contraption today: http://www.wortomatic.com/php/articles.php?ID=22
But it would be nice to have to flexibility to pump PBW then StarSan into kegs and kettles too. I'm picturing a 5-gallon bucket reservoir with PBW, and one with StarSan, hooked up to a pump and hose with a CIP spray ball on the end. Then drop the spray ball into the vessel (keg/carboy neck/kettle) and spray away. I haven't figured out how to recirculate, or if I would just pump all 5 gallons of solution into the vessel then reverse the flow
here is another solution (out of stock) :http://www.rebelbrewer.com/shoppingcart/products/Mark's-Keg-Washer-and-Carboy-Cleaner.html
seems like no one washes right-side-up; I guess there is a risk of spraying stuff out of the partially open lid?
But it would be nice to have to flexibility to pump PBW then StarSan into kegs and kettles too. I'm picturing a 5-gallon bucket reservoir with PBW, and one with StarSan, hooked up to a pump and hose with a CIP spray ball on the end. Then drop the spray ball into the vessel (keg/carboy neck/kettle) and spray away. I haven't figured out how to recirculate, or if I would just pump all 5 gallons of solution into the vessel then reverse the flow
here is another solution (out of stock) :http://www.rebelbrewer.com/shoppingcart/products/Mark's-Keg-Washer-and-Carboy-Cleaner.html
seems like no one washes right-side-up; I guess there is a risk of spraying stuff out of the partially open lid?