Recent content by luhrks

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. L

    Washington 1.5bbl Beer Brewing HERMS/RIMS system FS

    1.5bbl HERMS/RIMS system for Sale all inclusive. Everything necessary to produce Beer from Brewing to Kegging is included. After 3 years and many batches on this system, I've lost my brewing space so my loss is your gain. You will get everything in this posting. I will not be selling pieces...
  2. L

    Single Tier, 3 Pump, BCS-462, Automated Rig

    Way to go. Looks like my rig will be the pilot for our new brewery.
  3. L

    Efficiency Boost?

    I normally get between 90-95% efficiency on mine.
  4. L

    brewershardware jacketed coni+glycol ?'s

    My glycol chiller operates the pump continuously and has a temp control that cycles the compressor if the reservoir gets over temp. Different models varry, so I would check on the one you're going to purchase before you buy extra stuff.
  5. L

    Question about HERMS/pump/lines

    I fly sparge on 1.5bbl HERMS system. Although a "fly sparge" for me takes 15 minutes instead of an hour. All I do after mash out is swap hoses so my MT out goes to the BK and my HLT out goes to my HERMS in. So yes, I flush my HERMS coil with sparge water. There is no wasted wort. I don't have...
  6. L

    Boayou Classic HERMS Mash Tun Conversion with Jaybird False Bottom

    My stand was an "O" but the X version should work just fine. The dip tube in mine is near the center so it's ringed by the stand, which adds a side filter. If you have an X you should pick a quad and place the hole closer to the edge. No, the junctions of the dip tube were not soldered. You...
  7. L

    Mash tun dip tube question

    In practice, not really. The only real consideration is making it so you can get the false bottom in and out easily.
  8. L

    Mash tun dip tube question

    I've got a post on how to convert one of these up already. Please feel free to look it up.
  9. L

    Question about HERMS/pump/lines

    You want your HERMS coil to be the same diameter as the rest of your plumbing.
  10. L

    Help figuring out HERMS

    Look up a HERMS process diagram and things should become more self explanitory. There should be two ports on the mash tun if he was running it right.
  11. L

    How do u clean a keggle?

    For your initial cleaning. Hot PBW or a good caustic to clean all the crap up. After that, green pad and dish soap with a good rinse. About once a year or so you'll want to do a caustic cycle again to get all the beer stone. There's never a good reason to sanitize anything on the hot side...
  12. L

    kegging questions

    That's a good deal. grab it.
  13. L

    Sterilizing a Blichmann Beer Gun

    I would put it in a box along with the bill for the replacement gun, give it to him along with a stern lecture about respecting other people's property and boundaries.
  14. L

    False Bottom question for HERMS build

    Rice hulls. If you're running HERMS rice hulls cure most sins.
  15. L

    Tri-clamps vs Camlocks

    Yep. He got it all pretty much. I use both on my system.
Back
Top