Recent content by kmenard

70 min boil is correct. You want to have your total boil volume around 6 gallons or so. You will boil off some water during the boil and lose some to the sludge in the bottom after the boil. 6 gallons should yield about 5 gallons when you are done... Recipe Type: Extract Yeast: White Labs...

https://drive.google.com/file/d/1vtJ82K8Q2qT0rqRDq3kKHLF_p2f8hpnYgvphD-EIebXPdPObN47zcSeiHA5WZ6D5LmEQWPDm2X6jvA0r/view?usp=sharing Chugging right along :)

Woke up yesterday morning to Krautzun! Thanks for talking me down :)

I brought the wort down to 58, pitched the yeast, and 12 hours later I still have no activity. Cause for concern? My SG looked great! I oxygenated the wort, the yeast pack had lots of activity.

I thought about this as well...unfortunately the recommended temp sensors aren't rated high enough. This might be a good way to go: https://www.raspberrypi.org/forums/viewtopic.php?f=37&t=18142

I built a fermentation fridge with a brew pi and am going to try my first Kolsch this weekend (morebeer.com kit with Wyeast (Kolsch) - 2565) I have never had a fermentation fridge before and never done a Kolsch...so I am looking for some tips on the fermentation schedule. Any help is much...

Is there anyway to have the brewpi (or I guess raspberry pi) automatically connect to wifi when you turn it on so you don't need a monitor close by?

as I said, I m pretty new to controlling ferm temp...why do you start off so cold?

This is my first time using something like brewpi. My fermentation control has been limited to...the basement seems about the right temp. So, I was wondering if anyone would like to share any brewpi profiles they may have?

Please put up a link when you do!

I am starting to see the way this works now. It is REALLY cool. Can't wait to start using it! Thanks for all the help! Sorry about the question on sharing profiles, when I was looking at a couple of the systems there was talk about a that, I thought it was a pretty cool idea.

Is there a place I can read more about the web interface? So...I could check or say edit the fermentation from work?

Perfect! Thank you! Couple more questions if I may: 1) Where can you find brewing profiles? 2) Is it possible to run raspberry pints and brewpi on the same raspberry pi?

Thank you for the help...I will try that tonight!

I believe I did that...unless I am missing something. I followed the clone directions here: http://docs.brewpi.com/automated-brewpi-install/automated-brewpi-install.html Which I would think has the latest version of brewpi. I also tried to update the Arduino Uno hex file which is how I...