ooo it is 13.2 gallons
it says 50L on the side 50L=13.2086 gallons. HA damn metric system
weak though now i have 2 less gallons after doing all the conversion
HMM didn't know they exist. it measures 21 1/4 inches high( from top to bottom including handles) and 15 3/8 inches diameter. OD. It is from interbred if that means anything to anyone. it looks like any other keg i have seen though.
I did get it from this vietmise restaurant's who was getting...
I recently added a sight tube to my keggle and after i finished marking it seemed to only hold 13.5 gallons for a 15.5 gallon keg.
I have a drop tube that goes to the bottom of my keg and leaves about a half gallon in the pot.I accounted for this with my sight tube.
My sight tube starts at...
I cant find any copper crosses locally for the copper manifold so i am thinking a square CPVC one in a circular 10 gallon mash tun. on the CPVC ones do you just press fit them together or is the glue ok?
on Saturday i was brewing a 10 gallon batch with 20# grain and i got stuck mash for the first time.There are allot of factors that might contribute to this,
1. my lhbs closed recently so this made me make my own grain mill. i made a 2 roller one that is adjustable. i set it to a good crush i...
I have a freezer that i use as a kegarator. It started rusting like crazy inside. I have sanded all the rust away( hours of work) and sprayed the inside with high performance enamel by rustola. is there something else i should put on the inside to prevent this from occurring again.
since it...
i am trying to find out if my keg is aluminum or ss as well . i used a plasma cutter to cut the top off and it weighs 24 pounds now. and the top was 2 Lbs 10 oz
is that 29.7 pounds for aluminum or ss keg?
the ss one should be much heavier
mine is about 26.5 lbs does this mean it is...
AAAA got it thanks ya i had if backwards
this link messed me up with plug end i thought it was the end you plug your device into and receptacle end is where it receives it's power from...
my first unit i wired up just twisted the wires together and got them in clamps as snug as possible. when i plug it in nothing happens nothing on the lcd screen. so i thought he unit was broken and sent it back and got a new one and i am having the same problem. I am real sure i am wiring it...
those look like plastic tower shanks?
are those something you found at home depot or did you buy them from some brew shop. i have been putting off building my own draft tower because i cant find a reasonable price on tower shanks 22$ a pop i think is ridiculous.
does any one have any ideas...
I have acquired a couple onces of weed leaf from a friend that is covered in thc.
after reading most of this thread i came to a conclusion what i am going to do with it.
I am probably going to throw it into the mash since a temperature of 170 will be enough to dissolve the thc.
what kind of...
I have acquired 2 ball lock kegs and i have gray and black ball lock fittings. when i take them apart the are the same though. Is there a difference between gas out and liquid in ball locks.