Recent content by forcabrew

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. forcabrew

    ISO 3 liter Ft my cellar

    Hey everyone it's been a while since I've traded here. But I'm looking for a 3liter of something cork and caged for a special occasion. My cellar consists of a bunch of miscellaneous bottle. From OEC,SARA, Degarde, a couple of loons, Oxbow, allagash wilds, and various other Sours and Ba stouts...
  2. forcabrew

    Motorized Monster Mill Build

    My cousin who is a high voltage electrician took a look at my wiring and said it was wired correctly but that the motor didn't seem to be functioning properly So I had my cousin take the motor to his work to test it out. He reported that there was a dead spot in the motor. He explained it to me...
  3. forcabrew

    Motorized Monster Mill Build

    So I just received my newly exchanged gear reducer and I still can't get it to spin. The motor spins when not connected to the reducer. Hopefully some of you can help me trouble shoot this issue. The links below are of the items I'm using. Anyone see any issues with these? They should work with...
  4. forcabrew

    Motorized Monster Mill Build

    Ok so I tried it and I'm have trouble with the gear reducer spinning. When the motor is not connected to the reducer it works and spins fine. When I couple to the reducer the motor sounds like it's stalling and it doesn't turn the reducer. When I check the reducer the coupler the hooks to the...
  5. forcabrew

    Motorized Monster Mill Build

    Found it. I'll give it a shot. Quick question the nuts that come pre screwed on to the brass post. Do you remove those before wiring everything or just go on top of them and then with the other brass washers and nuts from the bag supplied.
  6. forcabrew

    Motorized Monster Mill Build

    Looks like the wiring for my lesson is different. I tried wiring it like the op but it would turn my gear reducer. I'm using the same McMaster switch with the forward and reverse. My wiring is all T's Can anyone help me out with a drawing like op's. I'm bad when it comes to this stuff
  7. forcabrew

    Ft MBC dinner, lunch etc...

    Dinner is bottles 6/20/15 and lunch is 6/16/15
  8. forcabrew

    Ft MBC dinner, lunch etc...

    Ft dinner, lunch, oxbow, etc.. ISO. Back acre, Sara, side project, de garde, sours etc...
  9. forcabrew

    FT: Fou ISO: SNR10

    https://www.homebrewtalk.com/showthread.php?t=511458
  10. forcabrew

    FT: Stille Nacht Riserva

    Ft Stille Nacht Riserva 750ml bottle says produced in 2012 I believe. I also have access to most 50/50 eclipse variants ISO Cantillon 3f side project Sara other sour lambics of same rarity I trade $4$
  11. forcabrew

    Secondary Reg leak

    Thanks for the reply. Going to play around with the regs today
  12. forcabrew

    Secondary Reg leak

    Bump
  13. forcabrew

    Secondary Reg leak

    So I got a Cornelius 4 body secondary regulator set that I had to rebuild. When I put it all back together there were a couple of small leaks. My question is can I use this with or with Teflon tape? http://www.amazon.com/dp/B001AMMXZW/?tag=skimlinks_replacement-20 I know kegconnection uses this...
Back
Top