Below is a pic of the BIAC mash colander. I would install the Slayer port just opposite the re-circulation port and run with the lid in place. So no issue with the Slayer vacuum not working.
https://brewhaequipment.com/products/mash-colander
I am thinking of adding a1.5" weldless TC fitting to just opposite of the existing 1.5" port on the mash colander of my medium Brewha BIAC and installing a large Steam Slayer. The lid for the colander is not heavy enough to support the Steam Slayer using a top mount and 90 degree bend, besides...
Looking for guidance on the best way to clean and disinfect the cooling jacket of a medium BAIC 4-in1? I plan to use a Brewtech .5HP chiller with water to cool but would like to use heated water from the jacket to sparge. I am concerned that the welds internal to the jacket are not polished as...
I am looking for a SS blowoff bucket to use instead of some random glass or plastic container laying on the floor. Seems like a reasonable option for those that are spending $1K+ on a SS conical.
Something with a bracket that allowed for attachment to a conical leg? Even better if a SS blowoff...
Just had someone suggest an obvious (well obvious to them not me) alternative:
1. Leave the Blichmann Brew Commander main power output connected to the 240V 4500W element as used for Boil/Mash.
2. Connect the main power input (normally 240V) of the Brew Commander to the TC-15A 120V heater...
Looking for comment on this approach to a fermentation heater for the BREWHA Medium BIAC.
The BIAC has a 240V 4500W heating element controlled by a Blichmann Brew Commander for Boil and Mash operations. I am considering using a Poniie TC-15A Temperature Controller...
Thanks
Perhaps someone from Brau Supply can provide comment. Odd that they do not have any phone based technical support nor have they responded to email questions on how the cooling works and the difference between the site description and photos and those like yours and others on various boards.
Thanks
I am also looking at the BREWHA Small 4-in-1BIAC unit with a 3" packed column. Might get the dome lid modified to have a 3" TC fitting added for the column if adapting to the 1.5" TC port doesn't work well. The BREWHA and Brau Supply are about the same cost, the first has a much more...
I am considering using the Brau Supply Unitank Pro All In One for both beer brewing and for distillation. They mention that only 2.1 Gal is required for full element submersion so seems like no worries for a 5-6 Gal batch in a still configuration.
Would be adding a 3" Hybrid Reflux column from...
The photos of your equipment and those on the Brau Supply differ significantly. The Brau Supply site mention the vessel is jacketed and the photos seem to agree. Your however does not appear to be jacketed. What type of cooling system is used with the unit?
Is the grain basket the same as used...