Recent content by CarbonTom

If you end up parting out the keggerator, I might be interested in the 2ndary gas regulator shipped to 02135. Let me know!

I finally got my herms coil and was getting ready to install but then realized my keggle might limit my placement. It's a 1/2"x50' coil. Since I have a heating element in there I am limited to how low I can put it. Which either pushes me up almost to the top of the keg or down on the bump in one...

Sorry to resurrect thread. Did you just mash with them, any in the boil or dry "hop"? I am curious of trying this too.

+1 Regulator issue. When you bleed is it pretty obvious they are at 50 psi, like crazy loud blast? Your gauge could also be incorrect as well, if it is in fact 5 psi and reading as 50

English or Dark yes. But I also looooove saison at room/temp. Gravity samples always go down quick. Also Hydroflask waterbottles/growlers are the greatest invention ever. Worth the investment and then you can drink it cold! I bought a 64 oz growler a year ago, now I have a 20 and 36 oz one for...

I have found that melanoiden malt helps bring out red, you could sub that for some roasted malt. Also Red X malt is fantastic for that without any added roast, sub that for some munich. Good luck! Should be a delicious beer regardless.

Hey, I ended up not getting this. Sorry! I got a 10.6 CF GE freezer. works great. Can easily fit 5-6 kegs

Why not, I need more kegs. In!

Looking for some 5 and 6.5 gal glass carboys at a reasonable price, as cash is tight and I need to get some glass for some long term projects in the making. Thanks!

Well, yes I found corks, and not #7s. I think they were #8, but I found them at a LHBS. Had the full cork bottom and top, with the composite cork in the middle. Steamed them in Sulfate steam to sanitize the day of corking. Then I capped and waxed. Since I used smaller bottles, I had to...

I should have! I will at some point. My birthday was in november. The one I opened (and the one before just to check) were very minimal carb and pretty thick. I look forward to them carbing out and thinning out over time. I had a 40 bottle yield when all was said and done!

Yeah I started right back up again after haha. The compressor died on this already so now I have lost them all. I am starting a new build with a 10.6 cuft, but probably wont use the coasters again, since I have tons of ribbon stripe mahog scraps.

This is amazing and exactly what I needed to see. I just got a tap tower for xmas and was thinking about something like this to prevent having to tip it. Did you have to anchor the stand to the wall or ground so it doesn't tip when it is extended?

March? Bockkkkkk! Thats what I'm making soon. Plenty of lagering time.

I am hoping to get at least 4 ball locks in there without a collar, since I have an elaborate build I will embark on this winter. I just need to have the starting place where I can accommodate what I already have...