Recent content by Brew_Bro

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Brew_Bro

    What do you use when you squeeze BIAB?

    After trying various methods, now I hoist the bag and let it gradually drain while I kick off the boil. Once the drain has slowed to a drip I'll hold the top and give the lower end a spin to wring out a bit more. Never had an astringency issue, at least thus far.
  2. Brew_Bro

    Squeeze the bag

    Well done, Sir.
  3. Brew_Bro

    Squeeze the bag

    I use a hoist to hold the bag and when I mash out, I let the bag hang above the kettle and drip into the wort as I bring it up to boil, and will let it continue until well into the boil; no squeezing required. I will, on large grain bills, hold the top of the bag and spin the lower portion...
  4. Brew_Bro

    Tales of the Sediment: Damn the Bazooka!

    I appreciate your input. I characterize the off flavor as strong, almost biting bitterness which holds on for a bit even after the finish. I've had dry beers before, and this is quite definitely not that. Additionally, the two previous times I've experienced the flavor, it's gradually lessened...
  5. Brew_Bro

    Tales of the Sediment: Damn the Bazooka!

    My water hasn't changed, and I've had numerous beers come out excellently using the same water source I did with the astringent batches. The process difference has been me "experimenting" with mash times, ie I've ended up doing, for various reasons, almost 90 minute mashes in all cases. I expect...
  6. Brew_Bro

    Tales of the Sediment: Damn the Bazooka!

    This is exactly what I've been thinking, but I wanted to make sure it wasn't an issue with my LBHS doing too fine a grind on the grain; I've had some issues with astringency lately and it had occurred to me that the two might be related. Thanks everybody!
  7. Brew_Bro

    Tales of the Sediment: Damn the Bazooka!

    So I BIAB and often use large grain bills for 5 gallon batches, in the 18-21 lbs range. Most, though not all, of the times I've brewed a big bill I run into an issue with sediment choking up my bazooka screen when I'm draining into my fermenter, and I have to repeatedly scrape the screen with my...
  8. Brew_Bro

    Which whiskey to use for my stout??

    I've used Maker's Mark, Knob Creek, and Eagle Rare... anything that contributes to the complexity without adding uncharacteristic flavors is what I would recommend. For instance, caramel, vanilla, cocoa, oak, toffee would be good, and (to my palette, anyway) mint, excessive fruitiness, anise...
  9. Brew_Bro

    Mash temp a bit high

    So this ended up being a pretty good brew. Kind of a silky mouthfeel with hints of sweetness and citrus. Good summer brew, I'm pleased. :ban:
  10. Brew_Bro

    Mash temp a bit high

    Don't know yet. OG was 1.046, which is about .010 points below expected, a week ago gravity was 1.012. Will be bottling this week, assuming it's drinkable.
  11. Brew_Bro

    Mash temp a bit high

    Ah, good to know. Thanks, Damo!
  12. Brew_Bro

    Mash temp a bit high

    I am, actually.
  13. Brew_Bro

    Mash temp a bit high

    I am doing a SMaSH saison with 11# of two-row. I mashed in at 158f expecting it to drop to 148-150, but it only came down to 152 withing about 5 min. An idea of effects this will have? Thanks all. BB
Back
Top