Bobby_M's latest activity

It looks like some of the accessories, such as the butterfly valves busted through the box and was gouging the polished stainless pretty...

Did you do it as a really concentrated partial boil and a big top off in the fermenter or closer to a full boil? Tripels are a bit...

I have switched to Oetikers and only cut them off when the tubing gets old.

I'm a little confused with the way that thing is designed. I got a little chuckle out of how boastful the gent on the video was about...

It was really nothing. I mean, the building vibrated for about 5 seconds and it was trippy but nothing affected as far as I can tell...

That's what I meant by incompatible. Though if you do bottom out, you can use a grinder to take material off the bottom of the post...

The poppet spring pushes down on the flared top of the diptube which squeezes the diptube oring outward which seals against the inside...

Put the tip of the probe just about at the thin neck of the housing itself so the flow has to pass like 2" of the probe before it turns...

correct and corrected

The retainer clips are fine to use, but FYI you can "set" the teeth into the EVA tubing by giving a gentle pull on the tubing once you...

That's what I was figuring. Once you have a really fast system (heat times mostly), you'll build up a nice pipeline and have the luxury...

Welcome. This is one of my favorite topics and having brewed for 20 years and sold brewing systems for the last 12 or so, I think I'm in...

Unless you're brewing weekly or even daily, it seems the best option is a high torque paddle mixer drill from Harbor Freight...

I'm sure it was relatively isolated to the large order I received. When they're doing an assembly run, it comes right down to the...

The blichmann herms is a treat to install if you want weldless.