New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > DIY Projects > Anyway to tell if you kinked you CFC




Reply
 
LinkBack Thread Tools Display Modes
Old 01-20-2011, 12:51 PM   #1
milldoggy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Pottstown, Pa
Posts: 1,905
Liked 48 Times on 40 Posts
Likes Given: 2

Default Anyway to tell if you kinked you CFC

I just made my first CFC last night and while coiling it, there was one section that felt like it bent to fast. Hope I did not kink it. Is there any way to tell how bad a kink is or if you have one. Blowing through it, I feel no resistance. I used 5/8 soft copper, so 1/2 ID. I was thinking that I would fill a keggle and time how long it takes to drain. Then refill it to the same level and time it through the CFC. Would comparing the drain time tell me anything? Since the ball valve ID is smaller or the same as the copper ID.

any other ideas? Thanks



__________________
My E-Herms

My hop stopper
milldoggy is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2011, 01:15 PM   #2
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Hang Glider's Avatar
Recipes 
 
Join Date: Mar 2007
Location: North Augusta, SC
Posts: 3,138
Liked 139 Times on 113 Posts
Likes Given: 100

Default

sounds like a good idea to test. good luck, hope it's not kinked.



__________________
Hang Glider is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2011, 04:29 PM   #3
robbiex0r
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: La Crosse, WI
Posts: 124
Liked 2 Times on 2 Posts

Default

That will give you a rough idea, but I suspect it will drain slower due to the resistance in the cfc. You should notice any dramatic decrease though, I'd think.

__________________
robbiex0r is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2011, 08:02 PM   #4
Boar Beer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Boar Beer's Avatar
Recipes 
 
Join Date: Mar 2008
Location: Central NH, NH
Posts: 554
Liked 13 Times on 11 Posts

Default

Role a marble or ball bearing down it Start with a small one then keep going larger.

__________________

I was married for 10 years before my wife knew I drank.
Then one day I made a mistake and came home from work sober


Minus33.com

Boar Beer is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2011, 08:10 PM   #5
milldoggy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Pottstown, Pa
Posts: 1,905
Liked 48 Times on 40 Posts
Likes Given: 2

Default

thats a great idea, thanks!

__________________
My E-Herms

My hop stopper
milldoggy is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2011, 01:56 AM   #6
trigger
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: portland
Posts: 628
Liked 4 Times on 4 Posts
Likes Given: 2

Default

If you kinked it badly you should also perform a leak test. The copper is soft, but it can crack at those pinch points. Cap the output of the cooling circuit, then hook up the input and turn the hose on. If any water comes out of the inner wort circuit you'll have to disassemble, cut out the kink and sweat in a coupling. I did this with mine anyway just to guarantee that it would hold pressure just in case. I'd hate to have it explode on brewday and dump a bunch of cooling water into the bucket or kettle.

__________________
trigger is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2011, 07:10 AM   #7
wilserbrewer
Vendor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 7 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 6,202
Liked 331 Times on 284 Posts
Likes Given: 7

Default

Flow will be reduced fairly subsantially w/ the CFC as opposed to straight out the barb even if unkinked, this test is invalid.

__________________
wilserbrewer
BIAB Bags, Hop Bags and Ratchet Pulleys for sale

Expert tailor and supplier of custom sized, top quality BIAB bags, hop bags and ratchet pulleys at reasonable pricing

http://biabbags.webs.com/


CORONA MILL BUCKET SYSTEM V. 2.0
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2011, 12:56 PM   #8
milldoggy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Pottstown, Pa
Posts: 1,905
Liked 48 Times on 40 Posts
Likes Given: 2

Default

it does not leak, I am not 100% sure I kinked it. I would hate to take it apart and find I did not kink it. I will try the ball bearing this weekend. maybe I will just take it apart and take a look. wish I had an xray machine

any tips on uncoiling? do not want to introduce more kinks.

__________________
My E-Herms

My hop stopper
milldoggy is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2011, 01:57 PM   #9
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 4,998
Liked 55 Times on 53 Posts
Likes Given: 51

Default

My favorite way to test for leaks in something like the CFC tubing is to apply suction (yes, with your mouth) while holding your thumb over the opposite end of the pipe. With a little finesse, you can get your thumbs over both ends and hold the vacuum for awhile. If the vacuum holds, you have no leak. This is much easier to do than it sounds.

__________________
Catt22 is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2011, 09:03 PM   #10
bgrubb7
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: Effingham, IL
Posts: 137
Liked 1 Times on 1 Posts

Default

I would definitely not try to unroll it...Even if you can unroll it without introducing more kinks, you'll have a hell of a time rolling it back up... I unrolled my IC (very very carefully) to make a CFC out of. I unrolled it just fine, but when I tried to roll it back up again, it kinked and cracked in several places. The copper hardens just a little every time it gets bent, so straightening and re-rolling might be asking too much. I'd say if you still have half way decent flow and no leaks, then just run with it as is... kink or no kink.



__________________
bgrubb7 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Copper coil kinked... now what? CoalCracker DIY Projects 2 08-30-2010 11:30 PM