Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > What type/where to get tubing?
Reply
 
LinkBack Thread Tools
Old 11-01-2009, 06:03 PM   #1
kman42
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: San Diego
Posts: 81
Default What type/where to get tubing?

I need some tubing for the inside of my stainless braid for my DIY MT (per the Cheap and Easy MT thread) but I haven't been able to find it locally. Is there an online source for high heat, food grade tubing?

Also, what type of tubing do I need for tranfering from the MT to the kettle? I'm assuming this should also be rated for high heat. I'd lke to eventually put a quick disconnect on for when I ge my pump; any concerns there?

Finally, what size is the tubing for a blow tube on a glass fermenter?

Thanks!

__________________
kman42 is offline
 
Reply With Quote Quick reply to this message
Old 11-01-2009, 07:10 PM   #2
mordantly
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Westside..... CenCal - the country that'll never take away my guns or money !!!!!!!!!!!!!!!!!!!!!!!
Posts: 3,945
Liked 11 Times on 11 Posts
Likes Given: 1

Default

mcmaster-carr. get the food/beverage/dairy tubing thats autoclaveable. its the only tubing i use in brewing.

http://www.mcmaster.com

and see item 5231K355 as an example.

__________________

mordantly is offline
 
Reply With Quote Quick reply to this message
Old 11-01-2009, 07:44 PM   #3
BreWirfel
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: maryland
Posts: 168
Liked 2 Times on 2 Posts
Likes Given: 1

Default

Quote:
Originally Posted by mordantly View Post
mcmaster-carr. get the food/beverage/dairy tubing thats autoclaveable. its the only tubing i use in brewing.

http://www.mcmaster.com

and see item 5231K355 as an example.
that tube is only rated for 175* not saying it wont work, but i would look for something rated to 212+. your mash turn wont get that high, but boiled wort will.
__________________
Drinking beer is a lifestyle...Brewing it is a hobby

On Tap


Carb/Condition


Secondary


Primary
Edworts Apfelwein


Kicked
BB Continental pilsner
Coopers IPA, dryhopped with 1oz cascade
High Sierra Celebration Ale (Clone)
Austin Homebrew Celebration Ale
BreWirfel is offline
 
Reply With Quote Quick reply to this message
Old 11-01-2009, 08:38 PM   #4
mordantly
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Location: Westside..... CenCal - the country that'll never take away my guns or money !!!!!!!!!!!!!!!!!!!!!!!
Posts: 3,945
Liked 11 Times on 11 Posts
Likes Given: 1

Default

its rated 175F continuos.. but the fact it can be steam (autoclaved), gas, or chemical sterilized and is 3a dairy, i won't worry about it. perhaps if you run boiling water though it all day, it may get extremely limp and kink if not supported. i just dont see it melting.

__________________
mordantly is offline
 
Reply With Quote Quick reply to this message
Old 11-01-2009, 09:57 PM   #5
Sawdustguy
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2009
Location: Manorville, New York
Posts: 2,772
Liked 29 Times on 25 Posts

Default

Just go for Silicone Tubing. You can get it at most Home Brew Stores.

__________________

Guy

Sawdustguy is offline
 
Reply With Quote Quick reply to this message
Old 11-02-2009, 03:28 AM   #6
wilserbrewer
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 9 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,272
Liked 571 Times on 466 Posts
Likes Given: 11

Default

Just my opinion, i think you are better off w/out the tubing inside the braid, and simply using the braid as is. Some have reported this to cause a slow or stuck sparge...If you insist on putting something inside the braid, a coiled wire or a spring is a better option IMO.

wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Old 11-02-2009, 03:36 AM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,249
Liked 1056 Times on 704 Posts
Likes Given: 28

Default

Agree with wilser.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 11-02-2009, 11:04 AM   #8
RunBikeBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: CT
Posts: 166
Liked 2 Times on 2 Posts

Default

+1 on coiled wire inside the braid. I put coiled copper wire (ground wire from leftover Romex) inside my braid and it works fine.

__________________
RunBikeBrew is offline
 
Reply With Quote Quick reply to this message
Old 11-02-2009, 05:41 PM   #9
kman42
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: San Diego
Posts: 81
Default

Quote:
Originally Posted by wilserbrewer View Post
Just my opinion, i think you are better off w/out the tubing inside the braid, and simply using the braid as is. Some have reported this to cause a slow or stuck sparge...If you insist on putting something inside the braid, a coiled wire or a spring is a better option IMO.
Hmm...I'm having a hard time visualizing this. I thought the main purpose of the tubing was to attach the braid to the bulkhead, rather than using stainless steel clamps which seemed to corrode for some people. Is there an alternative method of attaching the braid?

thanks,
kman
__________________
kman42 is offline
 
Reply With Quote Quick reply to this message
Old 11-02-2009, 05:51 PM   #10
BargainFittings
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
BargainFittings's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Allen TX
Posts: 1,915
Liked 56 Times on 48 Posts
Likes Given: 5

Default

If the clamps corrode they are not stainless. Some stainless clamps have coated steel screws and ss bands.

I use a ss braid over a copper tube and it works. It does not clog and drains just as fast as without anything in the braid. I have about an inch or so of braid sticking past the end of the copper tubing.

__________________

Wayne


Stainless Weldless kits and Flat $5.00 shipping to USA 50 States!
STAINLESS STEEL 3 piece valves $10.95! 2 piece valves $7.99
BargainFittings.com

BargainFittings is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What type of tubing for brew rig? brewjunky Equipment/Sanitation 19 05-07-2009 07:07 AM
Keg type???? spazus_maximus Beginners Beer Brewing Forum 3 11-09-2007 06:43 AM
Type C Raffie Recipes/Ingredients 4 06-14-2007 08:49 PM
Co2 Vol for type ? Gabe Bottling/Kegging 3 05-14-2007 03:38 PM
type of pot klcramer Beginners Beer Brewing Forum 2 05-15-2006 02:30 PM



Newest Threads

LATEST SPONSOR DEALS