cbraun77s
Well-Known Member
I have a complete 20+ gallon three vessel system for sale. It has served me fantastically for over 5 years, but I must say goodbye as we have finally attained our 5BBL system by the same company.
So, here is the details. Don't message me on HBT, send e-mail to the address listed below. I will only do local pickup. (near southern Lancaster and Chester County)
20+ Gal. Brew Kettle with Tangential Inlet, Thermowell & Sight Glass
Combi Brew Kettle/Whirlpool
Tangential Inlet
Sight Glass with Tri Clamp Fittings
Thermowell with Thermometer
(2) Sanitary 3/4" ball valves (5/8" ID)
(2) Sanitary Hose Barbs – 1/2"
Tri Clamps and gaskets
Actual total capacity approx. 21.5 gal.
conical-fermenter.com/products/brew-kettles/
19.8 Gal. Mash Tun
Mash Tun
False Bottom
Sanitary 3/4" ball valve (5/8" ID)
(3) Tri Clamps, with gaskets
(2) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
Welded-In Recirculation Fittings
http://conical-fermenter.com/products/mash-tuns/
19.8 Gal.Hot Liquor Tank with HERMS Coil & Sight Glass
Simply the most advanced hot liquor tank available.
Hot Liquor Tank
Sanitary 3/4" ball valve (5/8" ID)
(6) Tri Clamps, with gaskets
(3) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
(2) HERMS Fittings
Stainless Internal Coil
Sight Glass
http://conical-fermenter.com/products/hot-liquor-tanks/
Fully automated electric control panel. Used the directions and materials from here:
http://www.theelectricbrewery.com/control-panel
March High Temp.Brewing Pump-Model 809
http://morebeer.com/products/march-high-temperature-brewing-pump-flow.html
NEW PRICE- $159
Super Chiller- Immersion Wort Chiller (50Ft x 1/2 in)
http://morebeer.com/products/wort-c...atches-50ft-of-12-in-with-brass-fittings.html
NEW PRICE- $117.95
Stainless Steel Quick Disconnects (2 male & 2 female) attached to wort chiller
http://morebeer.com/products/mpt-stainless-steel-female-quick-disconnect.html
http://morebeer.com/products/mpt-stainless-steel-male-quick-disconnect.html
NEW PRICE-$49.80
10-gallon "tippy dump" brew sculture- similar to the more beer sculpture listed below. Mine is powder coated black.
http://morebeer.com/products/10-gallon-tippydump-brewsculpture-1.html
NEW PRICE- $1,200 (built for me)
Grain Mill with 7 pound hopper.
http://www.homebrewing.org/Barley-Crusher-Grain-Mill_p_872.html?AffId=95
NEW PRICE- $130
I will also throw in the following to someone looking for everything they need:
(2) 5 gallon glass carboys
(2) 6 gallon glass carboys
(4) Used Ball Lock Cornelius Kegs
Then there is a bunch of other miscellaneous extras including refractometer, hydrometer, hosing, too much to list.
All the work is done for you here. The man hours of labor that went into compiling this is substantial. I will even throw in a custom built vent hood.
I have this priced to move: $5,100
E-mail with interest or questions:
[email protected]
So, here is the details. Don't message me on HBT, send e-mail to the address listed below. I will only do local pickup. (near southern Lancaster and Chester County)
20+ Gal. Brew Kettle with Tangential Inlet, Thermowell & Sight Glass
Combi Brew Kettle/Whirlpool
Tangential Inlet
Sight Glass with Tri Clamp Fittings
Thermowell with Thermometer
(2) Sanitary 3/4" ball valves (5/8" ID)
(2) Sanitary Hose Barbs – 1/2"
Tri Clamps and gaskets
Actual total capacity approx. 21.5 gal.
conical-fermenter.com/products/brew-kettles/
19.8 Gal. Mash Tun
Mash Tun
False Bottom
Sanitary 3/4" ball valve (5/8" ID)
(3) Tri Clamps, with gaskets
(2) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
Welded-In Recirculation Fittings
http://conical-fermenter.com/products/mash-tuns/
19.8 Gal.Hot Liquor Tank with HERMS Coil & Sight Glass
Simply the most advanced hot liquor tank available.
Hot Liquor Tank
Sanitary 3/4" ball valve (5/8" ID)
(6) Tri Clamps, with gaskets
(3) Sanitary Hose Barbs – 1/2"
Thermowell with Thermometer
(2) HERMS Fittings
Stainless Internal Coil
Sight Glass
http://conical-fermenter.com/products/hot-liquor-tanks/
Fully automated electric control panel. Used the directions and materials from here:
http://www.theelectricbrewery.com/control-panel
March High Temp.Brewing Pump-Model 809
http://morebeer.com/products/march-high-temperature-brewing-pump-flow.html
NEW PRICE- $159
Super Chiller- Immersion Wort Chiller (50Ft x 1/2 in)
http://morebeer.com/products/wort-c...atches-50ft-of-12-in-with-brass-fittings.html
NEW PRICE- $117.95
Stainless Steel Quick Disconnects (2 male & 2 female) attached to wort chiller
http://morebeer.com/products/mpt-stainless-steel-female-quick-disconnect.html
http://morebeer.com/products/mpt-stainless-steel-male-quick-disconnect.html
NEW PRICE-$49.80
10-gallon "tippy dump" brew sculture- similar to the more beer sculpture listed below. Mine is powder coated black.
http://morebeer.com/products/10-gallon-tippydump-brewsculpture-1.html
NEW PRICE- $1,200 (built for me)
Grain Mill with 7 pound hopper.
http://www.homebrewing.org/Barley-Crusher-Grain-Mill_p_872.html?AffId=95
NEW PRICE- $130
I will also throw in the following to someone looking for everything they need:
(2) 5 gallon glass carboys
(2) 6 gallon glass carboys
(4) Used Ball Lock Cornelius Kegs
Then there is a bunch of other miscellaneous extras including refractometer, hydrometer, hosing, too much to list.
All the work is done for you here. The man hours of labor that went into compiling this is substantial. I will even throw in a custom built vent hood.
I have this priced to move: $5,100
E-mail with interest or questions:
[email protected]