I am purchasing a brew pot for all grain batches and i have a question I can get a 10 gallon pot that is 1.2mm thick for 170 or a 15 gallon pot for 180 that is 1mm thick, is the thickness of .2 mm difference should that be a factor in this decision I woul like the 15 gallon for 10 gallon boils in the future, any help from you veteran brewers would be much appreciated...thanx
need advice on a brew pot
- Thread starter luvinit
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Would it be fair to say that any SS pot from a reputable manufacturer would be fine?
I will say this, even from my limited experience thus far, if you think you need a 10 gallon pot then get the 15 gallon!
I will say this, even from my limited experience thus far, if you think you need a 10 gallon pot then get the 15 gallon!
http://www.provantage.com/bayou-classic-1064~7BAYC001.htm
I have one of these have done 35 batches 11.5 gallons each since last July with it and could not be happier
all the best
S_M
I have one of these have done 35 batches 11.5 gallons each since last July with it and could not be happier
all the best
S_M
Similar threads
