Grossy

Recipes 

The most effective pattern is when they are all aimed at another jet.

I plugged all of mine except 6. All 6 are aimed into the middle, so that all 6 jets hit together.

__________________
Northfarthing Brewery
Grossy Proudfoot, Proprietor

Tap #1: There and Back Again IPA
Tap #2: Wheat Ale
Tap #3: Northfarthing Pale Ale

"That was proper 1420, that was."
- Old Gaffer at the Bywater Inn

dcbc

Recipes 

Thanks. What size plug?

__________________
Brew Stands Gallery

Grossy

Recipes 

Just unscrew one of the burners, take it down to Home Depot and get a nut with the same size thread, no more than an 1" long. While there get some gas Teflon tape. Then screw the nut into the burner.

It is an unusual thread, I found the nuts I needed in the specialty nuts and bolts bins.

__________________
Northfarthing Brewery
Grossy Proudfoot, Proprietor

Tap #1: There and Back Again IPA
Tap #2: Wheat Ale
Tap #3: Northfarthing Pale Ale

"That was proper 1420, that was."
- Old Gaffer at the Bywater Inn

dcbc

Recipes 

Thanks, I will give it a look. I have some gas tape already. The first couple of burners had lots of loose jets to be fixed. Part of me wants to just ditch the two I have running with the Blichmann TOP controllers and get some low pressure Hurricane burners. I have to readjust the ignitor gap on the jet about 3 times per session. I think it would be better on the cast iron Hburners.

__________________
Brew Stands Gallery