Lopsy
Well-Known Member
- Joined
- Mar 1, 2013
- Messages
- 92
- Reaction score
- 11
I've exhausted the threads on the very strange .6" OD wort in/out on the SS CFC that i just purchased from Midwest. I would like to get the .6" to 1/2" NPT. I didn't see anyone that has found a slick solution. One guy had some welded on, but there must be a simpler way. My current solution is to stick some 1/2" OD SS tube that I have into the .6" OD tube (pretty good fit, tiny but of wiggle room) and sweat it on and then use a 1/2" to 1/2" NPT compression fitting from there.
My worry is that sticking the tube into the .6" will cause a perfect place for gunk to build up. I'll be circulating boiling wort to sanitize, but it still has me worried.
Thoughts?
My worry is that sticking the tube into the .6" will cause a perfect place for gunk to build up. I'll be circulating boiling wort to sanitize, but it still has me worried.
Thoughts?
