Beer-Baron Well-Known Member Joined Jan 11, 2010 Messages 322 Reaction score 29 Location Hamilton, On Apr 28, 2010 #1 I guess I would need a dual regulator? Or can I just split off 1 regulator and just carb them at the same rate?
I guess I would need a dual regulator? Or can I just split off 1 regulator and just carb them at the same rate?
GilaMinumBeer Half-fast Prattlarian HBT Supporter Joined Jan 23, 2008 Messages 65,431 Reaction score 10,794 Apr 28, 2010 #2 2 kegs, 1 tank, a tee, disconnects, and some hose.
OP OP Beer-Baron Well-Known Member Joined Jan 11, 2010 Messages 322 Reaction score 29 Location Hamilton, On Apr 28, 2010 #3 Where can I get a tee?
GilaMinumBeer Half-fast Prattlarian HBT Supporter Joined Jan 23, 2008 Messages 65,431 Reaction score 10,794 Apr 29, 2010 #4 Morebeer, AHS, BMW, etc...... Hell. you can prolly find a brass tee at Lowes.
jeffmeh Well-Known Member Joined Feb 26, 2009 Messages 2,145 Reaction score 216 Apr 29, 2010 #5 Two check valves, one per output branch of the tee, if you want to be sure that beer from one keg does not make it into the other. http://stores.kegconnection.com/Detail.bok?no=343 Or you could just go with something like this: http://stores.kegconnection.com/Detail.bok?no=249
Two check valves, one per output branch of the tee, if you want to be sure that beer from one keg does not make it into the other. http://stores.kegconnection.com/Detail.bok?no=343 Or you could just go with something like this: http://stores.kegconnection.com/Detail.bok?no=249
Dave46382 Well-Known Member Joined Feb 13, 2010 Messages 115 Reaction score 7 Location Indiana Apr 29, 2010 #6 .... and time.