Wanted: Co2 Regulator

[Roz762]

I need a co2 regulator. Single or doubl gauge. I'd rather relieve sombody of equipment they don't need and help us both our, rather than buy new.

-Roz

 

[rustynuts]

I have a h/p co2 regulator I'm not using, it's a chudnow. It is a double guage reg, the output guage is 0-160psi so you would have to either replace that guage with a 0-60psi or go into a secondary set of regs. If interested, it's 25.00 plus shipping. BTW: it's in great shape.
Regards, Russ

 

[Roz762]

I'm curious about the output guage being a problem. Since kegs are pushed in the 10-15psi area, would that guage not work?

I am interested in the regulator for sure.

 

[friday]

I'm curious about the output guage being a problem. Since kegs are pushed in the 10-15psi area, would that guage not work?

I am interested in the regulator for sure.

The gauge will work sorta, a 160 gauge is nearly impossible to adjust properly. Switching out to a 30 or 60 gauge would be needed to get it dialed in correctly, it's no big deal you would need a 5 dollar gauge a vice and a good wrench, I've done it 4 or 5 times.

I just bought a nitro regulator from Rusty and I got a heck of a deal.

 

[MotivationDedication]

I have a h/p co2 regulator I'm not using, it's a chudnow. It is a double guage reg, the output guage is 0-160psi so you would have to either replace that guage with a 0-60psi or go into a secondary set of regs. If interested, it's 25.00 plus shipping. BTW: it's in great shape.
Regards, Russ

If the OP isn't, I am interested in your gauge if willing.

 

[Roz762]

Russ,

Sending you a PM with my info.

Roz