Middleboro Mass.
Hello everybody. I am making the jump to E-BIAB. I am looking to sell some of my gear in order to fund this project. I am a big DIYer so I don't know what is a fair price for what I am selling, so if anything seems too far off (low or high) PLEASE let me know.
so anyway, here are the items I am selling:
1. 15.5 Gallon Keggle. It is mostly shined (all nicks removed). Has 2 welded 1/2" couplings on the bottom. the right coupling threads on the inside are damaged (welding) from the inside and the left coupling has some damaged threads on the inside of the keg (from welding) but I was able to clean them up enough to get a few threads to attach a pickup tube. I will make you a custom ss pickup tube if you purchase this. In addition, the lid is custom made with the tap welded to the top. (2in ss plug fitted for weight and closure. there is a space between the two so the handle does not get hot. Also included is a 1/2" ss ball valve with a ss JIC tube for vourlouf. $$ 75
2. 10 Gal Rubbermaid cooler. I have only used it for a HLT a couple of times. Included is a 1/2" ss ball valve, JIC drop tube to attach a hose or easily take off JIC fitting (barley hand tight) and attach ss sparge arm. (sold separately or as a group) there is no pickup tube but I could make one for you if interested. $$ 65
https://www.homebrewtalk.com/attachment.php?attachmentid=220025&stc=1&d=1409015724
https://www.homebrewtalk.com/attach...nt.php?attachmentid=220028&stc=1&d=1409015724
3. 1/2" ss sparge arm. this has a 1/2"ss JIC fitting. I will include an adapter to fit a 1/2" NPT fitting this has a kink near the fitting but hasn't affected performance. I drilled all the hole in a random pattern so a constant flow is sprayed over entire grain bed of a 10 gallon Rubbermaid cooler. $$ 20
https://www.homebrewtalk.com/attachment.php?attachmentid=220029&stc=1&d=1409015835
https://www.homebrewtalk.com/attachment.php?attachmentid=220030&stc=1&d=1409015835
4. ~50ft of 3/8" copper immersion chiller. I have used it about a dozen times and it works great! Includes plenty of clear tubing (not pictured) and a garden hose adapter. It is held together with ss wire. $$30
https://www.homebrewtalk.com/attachment.php?attachmentid=220031&stc=1&d=1409015904
5. 50 ft of 1/2 copper. Dont know the exact length of inner and outer coil. Both ends are left open to suit your exact needs. I built this in anticipation of using it as a herms coil but I have since decided to go BIAB. Could also be used as an immersion chiller??
I had already posted it on ebay so I am attaching the link.
http://www.ebay.com/itm/201156964495?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
...
If interested, please call me 857-207-5756 or email me at [email protected].
Thanks!
Hello everybody. I am making the jump to E-BIAB. I am looking to sell some of my gear in order to fund this project. I am a big DIYer so I don't know what is a fair price for what I am selling, so if anything seems too far off (low or high) PLEASE let me know.
so anyway, here are the items I am selling:
1. 15.5 Gallon Keggle. It is mostly shined (all nicks removed). Has 2 welded 1/2" couplings on the bottom. the right coupling threads on the inside are damaged (welding) from the inside and the left coupling has some damaged threads on the inside of the keg (from welding) but I was able to clean them up enough to get a few threads to attach a pickup tube. I will make you a custom ss pickup tube if you purchase this. In addition, the lid is custom made with the tap welded to the top. (2in ss plug fitted for weight and closure. there is a space between the two so the handle does not get hot. Also included is a 1/2" ss ball valve with a ss JIC tube for vourlouf. $$ 75
2. 10 Gal Rubbermaid cooler. I have only used it for a HLT a couple of times. Included is a 1/2" ss ball valve, JIC drop tube to attach a hose or easily take off JIC fitting (barley hand tight) and attach ss sparge arm. (sold separately or as a group) there is no pickup tube but I could make one for you if interested. $$ 65
https://www.homebrewtalk.com/attachment.php?attachmentid=220025&stc=1&d=1409015724
https://www.homebrewtalk.com/attach...nt.php?attachmentid=220028&stc=1&d=1409015724
3. 1/2" ss sparge arm. this has a 1/2"ss JIC fitting. I will include an adapter to fit a 1/2" NPT fitting this has a kink near the fitting but hasn't affected performance. I drilled all the hole in a random pattern so a constant flow is sprayed over entire grain bed of a 10 gallon Rubbermaid cooler. $$ 20
https://www.homebrewtalk.com/attachment.php?attachmentid=220029&stc=1&d=1409015835
https://www.homebrewtalk.com/attachment.php?attachmentid=220030&stc=1&d=1409015835
4. ~50ft of 3/8" copper immersion chiller. I have used it about a dozen times and it works great! Includes plenty of clear tubing (not pictured) and a garden hose adapter. It is held together with ss wire. $$30
https://www.homebrewtalk.com/attachment.php?attachmentid=220031&stc=1&d=1409015904
5. 50 ft of 1/2 copper. Dont know the exact length of inner and outer coil. Both ends are left open to suit your exact needs. I built this in anticipation of using it as a herms coil but I have since decided to go BIAB. Could also be used as an immersion chiller??
I had already posted it on ebay so I am attaching the link.
http://www.ebay.com/itm/201156964495?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
...
If interested, please call me 857-207-5756 or email me at [email protected].
Thanks!