• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Double IPA Tits-Up Imperial IPA (3-Time Medalist - 2 Golds, 1 Silver)

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Brewed this up, ended up with slightly more water than i wanted...so ended up with OG of 1.075, and my bitterness will be a bit higher because all of my hops had higher AA values than those listed, so Beersmith says ill be around 130IBU so we'll see...
 
So i didnt see any mention of fermentation schedule..

How long are you guys letting this one sit? 2 weeks Primary then 2 weeks Dry hop approximately?
 
BM, have you ever brewed these two as a partigyle? Flananuts, it sounds like you have, do you two (or does anyone else) have any suggestions in formulating this as a partigyle? Are there enough sugars left in the mash after a reasonably efficient sparge to get a small beer? I know there are many variables here. I've done a partigyle on my system already, after heavily studying (esp. the Mosher tables), and for my system I was thinking of trying to run the 10 gallon tits up recipe as two 6 gallon recipes. Any thoughts? Many thanks to BM for sharing so manny great recipes :)

Have done three tits up since beginning of may. The most recent was a parti-gyle.

I switched up the hops and a bit of the grains the first time because of lack of maris otter. But the second and third tits used the right grain bill.

5/9/13 Tits Up 10 Gallon O.G. 1.082
13lbs UK Pale Malt
10.75 Maris Otter
1.75 carapils
1.75 crystal 10
.5 honey malt
1 corn sugar

Hop Schedule w/ Hop Spider
1Columbus @60
.5 mt hood @60
1 nugget @45
1 horizon @45
2 centennial @30
1.25 Cascade @ 15
1 amarillo @10
.5 mt hood @10
2 mt hood @0

dry hopped half with citra

pitched 1.5 packs us-05 for each 5 gallon carboy

step mashed 132-122 for 30 min
148-152 for for 1hr


Tits up version2 6/5/13 10gal O.G. 1.072 (left picture)
24 Maris Otter
1.75 carapils
1.75 crystal 10
1 corn sugar
.5 light brown sugar

1 Falconers Flight @60
1 Summit @ 60
1 Cascade @45
1Horizon @ 45
1 Nugget @ 30
1Tettnang @ 30
1 falconers flight @15
1 centennial @15
1cascade @10
1Amarillo @10
1 Magnum @0
dryhopped with 1 oz cascade


Partigyle Tits inspired iipa (center pic) 6/19/13
grains in mash tuns

36 Maris Otter
2.5 carapils
2.5 crystal 10
1 honey malt

1st runnings collected 6 gallons
added
1 corn sugar
1.5 honey

hops
Magnum FWH
Columbus @90
Galena @60
.5 brewers gold @45
1 Amarillo @ 30
1 mt hood @ 10
1 mt hood @ 0

preboil gravity 1.090
o.g. 1.110!
three packs of rehydrated us-05

2nd runnings (right pic)
added to the mash tuns
2# Munich
1#crystal 20
mashed for 1hr @152
gathered 11 gallons
added 1# corn sugar
1# honey
hops
1 columbus @75
1 centennial(leaf) @60
1 nugget @ 45
1 horizon @45
1 cascade @30
1 amarillo @ 15
1 mt hood @ 10
1 centennial @ 0

O.G. 1.072


Thanks BM this base recipe has produced some great experiments.

threeee.jpg


1110.jpg
 
10 minutes into the boil. Hit my numbers right on so far (that's a first). Really looking forward to this. Thanks BM!
 
Also, thinking about naturally conditioning in the keg. Anyone done both and noticed different results with this beer? Seems like the yeast may clean things up a bit better with this sort of lag time.
 
KarlHungus76 said:
Also, thinking about naturally conditioning in the keg. Anyone done both and noticed different results with this beer? Seems like the yeast may clean things up a bit better with this sort of lag time.

Not sure about this beer specifically, but CO2 is CO2. If you let it condition in the fermenter for long enough (2-3 weeks) I can't see getting anything else for bottle conditioning
 
FlyDoctor said:
Not sure about this beer specifically, but CO2 is CO2. If you let it condition in the fermenter for long enough (2-3 weeks) I can't see getting anything else for bottle conditioning

I probably should've been more specific. I was toying with the idea of priming (with sugar) the keg itself. Maybe letting the yeast keep working given the amount of time I'd plan on letting this mellow. I'll of course still hook the keg up to co2 when it goes into the keezer, but I was thinking the 70 or so degrees with priming sugar may keep the yeast cleaning up the beer. If I ferment out, keg, chill, and carb, the yeast will be dormant.
It's obviously a big beer and was wondering if anyone saw any merit in adding about 2 oz of priming sugar, keeping it at room temp for a few weeks, then chilling, carbing, and (finally) drinking.
This method vs just the old rack, chill, carb, drink.
 
KarlHungus76 said:
I probably should've been more specific. I was toying with the idea of priming (with sugar) the keg itself. Maybe letting the yeast keep working given the amount of time I'd plan on letting this mellow. I'll of course still hook the keg up to co2 when it goes into the keezer, but I was thinking the 70 or so degrees with priming sugar may keep the yeast cleaning up the beer. If I ferment out, keg, chill, and carb, the yeast will be dormant.
It's obviously a big beer and was wondering if anyone saw any merit in adding about 2 oz of priming sugar, keeping it at room temp for a few weeks, then chilling, carbing, and (finally) drinking.
This method vs just the old rack, chill, carb, drink.

I've not brewed this beer yet, but it is on the list. My only concern with your plan is that letting it sit a few more weeks *may* reduce the hop profile.

My experience with an AHS Pliny the Elder clone that I let age for 4 or so months and it was great, a very quaffable beer, but I'm not sure that is what you are looking for. You may want to try and dry hop a week or two before serving to get that hop punch - I'm a more mellow hop-head so the extended aging helped me and mellowed the beer.

Again this is an extrapolation as I have not brew this beer yet.
 
My second batch of this beer is currently fermenting away in my closet. The first batch was true to spirit, but I had to make a few bittering hop changes due to availability. We drank that beer as fast as humanly possible, it was so good.
 
Howdy,
This is my second all grain brew, brewed it up yesterday. Missed my OG numbers by a bit, but I figured out what I was doing wrong (never set up my equipment correctly in beersmith, so I used too much water). I did my very first starter too, and I also bought an O2 tank and wand with a stone at the end.

So as expected I am bubbling away quite nicely, so much so that I had to install a blow off tube into a bucket of water as the S airlock was full of crud. It smells exquisite, and although my OG was only 1.072 I'm figuring this will be a great brew to be learning on.

So it's in my freezer with a johnson temp controller, fermenting away at 68º. In a month I'll transfer to a carboy and dry hop, by then I should have purchased a keg and be ready to learn how to keg and bottle from a keg.

Thanks BierMuncher, I may not have as much luck as you with this recipe on my first attempt but from the smell of it I'll have a tasty mistake! :mug:
 
Just took a sample of this after 5 days of dry hopping. This stuff is going be incredibly dangerous. I can't wait.
First time using honey malt, you can really taste it in this beer. Given the outrageous hop schedule I can see it would be extremely easy to overuse it..but man this is good. Cold crashing begins tomorrow evening, and then the hard part. Kegging, and waiting.
 
This brew was a smash hit at my wedding. By far the most popular of the three brews I made for the reception (other was the Raging Irish Red and a Limeade Wheat Shandy). Thanks for the awesome recipe! I'm glad I made an 8 gallon batch because now I have my 2.5 gallon keg all to myself mwahaha :drunk:
 
Ok, just moved it over to my keg (this is my first time kegging too). It's been 13 days since I dry hopped, and today I just check FG along with moving it to the keg. OMG....I couldn't believe the smell, it was wonderful! It's weighing in at 8.25% abv (OG 1.072, FG 1.010) and it looks really pretty light and clear. Nice orangey look to it, amber but pretty clear. And the taste... WOW! It tastes so fresh with a nice little warmth to the alcohol, and that's uncarbonated at room temperature.

So I'm following BierMuncher's recommended carbonation routine which is, if I've got this right, leave it in the keg at room temp uncarbonated for 2 weeks to age. Then pop it in the kegorator and pressurize at 30 for 24 hours. Clear the top pressure with the relief valve and set at 10 psi, serve. Does that sound about right? I did crack the co2 and bled out the air, just to get the oxygen out of the head space.

Let me know if this all sounds right. I am a patient man, but I have to say I can't wait to pull a pint for real!
 
Ok, just moved it over to my keg (this is my first time kegging too). It's been 13 days since I dry hopped, and today I just check FG along with moving it to the keg. OMG....I couldn't believe the smell, it was wonderful! It's weighing in at 8.25% abv (OG 1.072, FG 1.010) and it looks really pretty light and clear. Nice orangey look to it, amber but pretty clear. And the taste... WOW! It tastes so fresh with a nice little warmth to the alcohol, and that's uncarbonated at room temperature.

So I'm following BierMuncher's recommended carbonation routine which is, if I've got this right, leave it in the keg at room temp uncarbonated for 2 weeks to age. Then pop it in the kegorator and pressurize at 30 for 24 hours. Clear the top pressure with the relief valve and set at 10 psi, serve. Does that sound about right? I did crack the co2 and bled out the air, just to get the oxygen out of the head space.

Let me know if this all sounds right. I am a patient man, but I have to say I can't wait to pull a pint for real!

You did the right thing filling the head space with co2. Pushing 5 weeks since you brewed? I'd go ahead and set it to carbonate now. When properly fermented, and this was if you used a starter, fermentation chamber and oxygen; a beer like this is best served fresh. I'd set that puppy to 10 psi and you'll b e drinking it in a week or so.

Also, its time to think about another batch if you want another keg ready to drink in 6 weeks!
 
Thanks, I'm heading downstairs to move it to the cooler and put the co2 on at 10 psi. Been reading the sticky thread on forced carbonation and seems it should be ready to go with a week or so of steady 10-12 psi in the cooler.

Thanks for the advice. And yes, next brew day is Oct 28th, going to have my niece's boy friend helping me. Wish I could brew sooner but out of town later today, GABF next weekend then my son's wedding the following weekend. Ugh, I'll be ready to either brew by the 28th or hang myself! Winter Warmer is next, then a black IPA. I love this homebrewing thing.
 
I brewed this yesterday and there was really no clear cut instructions. I ended up with 4 gallons after the boil and added 2.5 gallons of water before dropping it in the primary. Can someone post step by step instructions for this recipe? This was my 3rd brew and I hope I got it right,
 
Many thanks to BierMuncher, what a recipe!

I just wanted to give a quick update on my efforts to brew this fantastic ale. I kegged and forced carbonated for 10-12 days, then drew a glass (ok a snuck a few glasses while I was awaiting the final product). Holy **** was it good! Damn near perfect, great citrusy grapefruity flavor, along with a nice warm fuzziness :drunk: I loved it, and I agree this is damn close to Pliny. And I actually was luck enough to have traveled to Denver the weekend before I tapped this brew to join in the GABF. I had multiple glasses of Pliny at Cheeky Monks in Denver throughout the weekend (that place is great too). So once I tried the Tit's Up I was amazed as to how close it seemed to be to the Pliny I had the weekend before.

One last note, my son got married the weekend after the Tits Up was ready to drink. My brother and brother in law, along with my help, practically killed that keg! I was brewing last weekend, a winter warmer, with my nephew and we kicked the keg. Bummer....

I can't wait to make this one again. Nice job Biermuncher!
 
I brewed this yesterday and there was really no clear cut instructions. I ended up with 4 gallons after the boil and added 2.5 gallons of water before dropping it in the primary. Can someone post step by step instructions for this recipe? This was my 3rd brew and I hope I got it right,

Sounds like you're not clear on your mash volumes. Do you know what your OG was before and after you added the 2.5 gals of water? It will probably be helpful to know your setup before anyone tries to help you get this right.

Personally I am still a bit of a newbie, but I'm getting my system down more and more after every brew. Whatever your issues are I'm sure we can figure this out. Give us a bit more info on your system (mash tun, or if you're using extracts, boil kettle, where you got your water volume numbers from, etc).

Good luck.
 
Sounds like you're not clear on your mash volumes. Do you know what your OG was before and after you added the 2.5 gals of water? It will probably be helpful to know your setup before anyone tries to help you get this right.

Personally I am still a bit of a newbie, but I'm getting my system down more and more after every brew. Whatever your issues are I'm sure we can figure this out. Give us a bit more info on your system (mash tun, or if you're using extracts, boil kettle, where you got your water volume numbers from, etc).

Good luck.

I couldnt measure my OG because I didnt have the tools at the time. I think a step by step instruction for this recipe would do the everyone wonders.

I didnt have a mash tun, didnt run extracts. I steeped the ingredients and added the hops by time as shown in the original recipe, I ended up with a gravity of about 1.010 I believe, my ABV is around 4%. I did taste it yesterday and I was more than thrilled with the outcome. Its the best beer I have ever tasted and its not even carbonated.
 
gonna brew this up next to try to deplete some of my hops i have in storage. Had to substitute a few hops. I used beer smith to make sure all the ibus stayed the same. Do these look like ok subs?

original Substitute
Columbus (FWH) ----- Centennial
Nugget (45min) ----- Warrior
Crystal (10min) ------ Willamette
Summit (dry hop) ------ Warrior
 
gonna brew this up next to try to deplete some of my hops i have in storage. Had to substitute a few hops. I used beer smith to make sure all the ibus stayed the same. Do these look like ok subs?

original Substitute
Columbus (FWH) ----- Centennial
Nugget (45min) ----- Warrior
Crystal (10min) ------ Willamette
Summit (dry hop) ------ Warrior

They look good to me. :mug:
 
I've had my eye on this recipe for a long time...finally got around to brewing it this past week. Added some Belgian Aromatic malt to add a little more color and bumped up the Honey malt by 1/2 lb (mistake on my part). Also added a bit more corn sugar to accommodate my system efficiency. I also used the Gleneagles variant of the Maris Otter as it happens to be a personal favorite. Hit my adjusted target of 1.094 right on the button. Also ran it through 2 oz of Amarillo leaf hops with my Hop Rocket. Fermenting nicely at present...really looking forward to this one.
 
Moved into secondary and added dry hops. Very nice flavor...had some decent hop flavors prior to dry hopping...hope to bring it up a notch. Looked at my hop leftovers after a busy month of brewing and I think I have enough leftovers for a second round of dry hopping next week :)
 
Picked up the ingredients to brew this on next Saturday. I'll follow the recipe exactly for the first go. I'll end up kegging this too. I'm excited, after a year of brewing this will be my first "big beer" and my first AG IPA. Done a few other extract IPAs and about half a dozen AG BIAB.

cheers!
 
I kegged my batch this morning. It has been tasting pretty good all along the way. I was really impressed with the hop flavor profile...this brew likely has the most hop flavor I have ever encountered. I expected more hop aromas to match, although they seemed a bit underwhelming in comparison to the flavor profile. Could be a combination of the cold crash temperature and lack of carbonation at this point. Just about there now :)
 
I know its been a while but what happen if i add the late hop addition with the hops for dry hopping? do you think i can get more flavor and aroma by avoiding the primary fermentation? (somebody says that the CO2 from fermentation scrub the hop aroma)
 
Really, truly, enjoying this brew. Has easily jumped into one of my all time favorite spots. Thanks so much for sharing, BierMuncher! Trying to get an updated photo from SWMBO with hops in place of the strawberries so I can have a label worthy of the brew :)

titsup.jpg
 

Latest posts

Back
Top