Switch Block Confusion

[bdogg171]

Good morning Electric brew experts, don't beat me too hard for what may be a silly question,

Switch Blocks - can multiple blocks be used to control different voltages on one switch? Example: On Off switch, Switch off - NO block = Open - No Power to Pump. Switch on = NO block closed - 120 v Power to pump. Add another NO contactor block, Switch On = 12V power to LED. In other words switch both 120v and 12v power on piggybacked contactor blocks, or doesn't it even wok that way?

 

[Deece]

Yes you can do that. Each block is isolated from the others.

 

[nhamilto40]

Yes; the blocks are independent and can be used for any ac/dc voltage within their rating.

 

[bdogg171]

Thanks Deece, I was thinking it might work that way but wasn't certain.